Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Stock FSJ Tech Area
Topic author
AwesomeJ10
Posts: 3031 Joined: Sat Aug 27, 2011 10:26 am
Location: Off the grid on Storm Mountain Colorado
Contact:
Post
by AwesomeJ10 » Fri Oct 19, 2012 5:03 pm
I know this is probably a dumb question, but I'll pose it anyway.
Are stock AMC V8 valves adjustable? Is there ANY reason to check them if there are no other problems?
lindel
Posts: 923 Joined: Tue Oct 04, 2011 2:47 pm
Location: Tool, TX
Post
by lindel » Fri Oct 19, 2012 7:30 pm
Nope, as long as you have the correct lifters and push rods, tighten the rockers all the way down and call it good.
Lindel
Topic author
AwesomeJ10
Posts: 3031 Joined: Sat Aug 27, 2011 10:26 am
Location: Off the grid on Storm Mountain Colorado
Contact:
Post
by AwesomeJ10 » Fri Oct 19, 2012 11:42 pm
Thanks - that's what I thought.
I'm running some non-stock push rods for some reason (they guy who built the engine said it needed them), but they seem to work fine...