Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
dljlobos wrote: ↑Fri Sep 01, 2023 6:30 pm
Hello, I apologize for not responding earlier to this. I don't know how I missed your message before now but I'm trying to catch up and hopefully still find some axles. Do you happen to still have those 82 axles? If so, do you also have any suggestions on how I could get them to Arizona for a reasonable cost?
dljlobos wrote: ↑Tue Apr 18, 2023 1:26 pm
Hello, Do you have any 1980 or newer J10 axles available? I'm looking for the front with the driver side drop Dana 44, and the rear centered AMC 20. Thanks
I have been loading axles onto my truck headed to the scrap yard. The 1982 J10 axles happen to be on top of the pile. The front has the vacuum disconnect apparatus. Both axles for $80. You can have the control unit on the dashboard too.
Gosh I’m sure those axles no longer exist.
I used to name my FSJ’s after their previous owners, I realized I had too many with five named Rick.
candymancan wrote: ↑Fri Sep 08, 2023 8:04 pm
Threepeice..Do you have J series truck tail gate arms. The two arms for the tailgates. The guy wjo i bougjt my J10 from took the tailgate off before i arrived.. and took them off.. and forgot to give them to me.
So now i need them. Since my bed is nearly done being rebuilt
I’m not selling any J series bed parts at this time.
I used to name my FSJ’s after their previous owners, I realized I had too many with five named Rick.
argonaut wrote: ↑Wed Aug 02, 2023 10:19 pm
I could use an air cleaner, in nice condition. Not sure how they changed over the years but I'd like one with less holes and less vacuum actuators, as I have converted to fuel injection. But I need the rectangular intake tube so i can connect to the stock fresh air hose in my 1980 wagoneer.
I am selling complete engines only sorry.
I used to name my FSJ’s after their previous owners, I realized I had too many with five named Rick.
Trident wrote: ↑Fri Jan 05, 2024 9:32 pm
I read in an old post that you had tooling to make fender flares. Are you still making them? If not, what are your plans for the tooling?
Despite my efforts to be clear I do not make any parts for the fender flair. I do make patch panels for the lower part of the Widetrack/J-Series fender. These are available at BJ’s Full Size Jeep Parts. Or I can sell them direct if you pick them up from the Detroit area.
I used to name my FSJ’s after their previous owners, I realized I had too many with five named Rick.
This is very specific, but I need one of the chrome shoulder bolts that attaches the upper armrest to the bottom middle seat. One of mine stripped out when trying to dismantle my center seat for re-upholstery.
Otherwise I guess I might be looking for another whole center seat/arm rest...
Jason M.
1980 Jeep Wagoneer 360/727/np208
1964 Chevy C10 Shortbed
1966 Chevy K20 Shortbed
1972 Chevy K5 CST
1996 Ford Bronco XLT Supercharged
2001 Porsche Carrera
argonaut wrote: ↑Tue Feb 13, 2024 1:48 pm
This is very specific, but I need one of the chrome shoulder bolts that attaches the upper armrest to the bottom middle seat. One of mine stripped out when trying to dismantle my center seat for re-upholstery.
Otherwise I guess I might be looking for another whole center seat/arm rest...
Gosh I don’t understand what you refer to here, “upper arm rest“ “bottom middle seat“ “chrome shoulder bolt” I am not familiar with these parts.
I used to name my FSJ’s after their previous owners, I realized I had too many with five named Rick.
Bolted to the hood, there's a bracket that retains the release cable to the hood with two bolts before it gets to the actual latch. I live in Waterford. So I'm not terribly far from you. And then without reading all the responses, looking for the elusive rhino grille. But that's a long shot I'm sure. Thank you sir.
fjs0001 wrote: ↑Tue Apr 09, 2024 3:04 pm
I need a passenger side door latch. I need the round older style. I think they switch to the crow feet style in 1980. Do you have one?
Yes, I have these but no shipping at this time.
I used to name my FSJ’s after their previous owners, I realized I had too many with five named Rick.