Johnson production FSJ Parts


Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

weeegoneeer wrote: Sat Sep 03, 2022 10:52 am Received mine today - super quality! Thank you again!
You're welcome! Thank you for your purchase!
Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

I wanted to share the next product I have been working on, replacement arm rest supports. These replace the commonly cracked plastic support that screws into the back side of the arm rest. This is close to the final product, I hope to have them ready for purchase on the website in about a month.

ImageImageImage

Sent from my SM-G981V using Tapatalk
Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981
User avatar

devildog80
Posts: 1016
Joined: Wed Apr 13, 2022 2:41 pm
Location: Apache Junction AZ

Re: Remanufactured Speaker Grilles

Post by devildog80 »

Nice :)
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

Mounting tabs for the reproduced speaker grilles are now availableImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

More door pull supports in stock! Somewhere between editing the last drawing and ordering the new batch of blanks the center holes shifted 0.30 inches right, so i have redrilled the holes. Still fully functional just unsightly so they are at a discounted price again.

Also still have stickers and reproduction speaker grilles in stock!

Johnsonproductionjp.comImageImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

Free shipping on U.S. orders over $100Image

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

Not 100% ready but close! FSJ and AMC rear door pull supports development nearing completion. Coming soon to Johnson Production

Johnsonproductionjp.com

ImageImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

I have started working on the CAD model for the newest product - sunvisor clips. End goal is an injection molded piece with the same texture and color as original.ImageImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

Cyber Monday sale Monday 11/28Image

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

Rear Door Pull supports for Wagoneers and Cherokees are in stock!

Johnsonproductionjp.com Image

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

New sticker! Plus get a free Christmas sticker with every order until 2023 ImageImageImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

Trim attachment tabs for Johnson Production front door pull supports are almost ready. These tabs will allow you to attach the plastic trim around your front door pulls to the JP aluminum door pull supports. Will be available within the next two weeks.

Johnsonproductionjp.com
ImageImageImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

Anyone reading these posts? First 3 people to reply get a 20% off discount code and free sticker.

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981
User avatar

dodgerammit
Posts: 1432
Joined: Wed Jan 11, 2017 11:20 pm
Location: Middle TN

Re: Remanufactured Speaker Grilles

Post by dodgerammit »

SJohn wrote: Fri Dec 16, 2022 11:10 am Anyone reading these posts? First 3 people to reply get a 20% off discount code and free sticker.

Sent from my SM-G981V using Tapatalk
I'll bite :D My Jeep (and wife's Eagle) are in decent shape, but will probably grab something regardless.
84 Grand Waggy-Radio Flyer (Garnet Red/3M Ebony Metallic woodgrain, with honey interior) AMC 360 :cry: 2004 4.8LS/Advance Adapter/727/242 D44/AMC20 Serehill tailgate and headlight harnesses :fsj: Ongoing thread-viewtopic.php?t=11897

92 Wrangler Islander 4.0/32RH/231 D30/D35 RHD

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

dodgerammit wrote:
SJohn wrote: Fri Dec 16, 2022 11:10 am Anyone reading these posts? First 3 people to reply get a 20% off discount code and free sticker.

Sent from my SM-G981V using Tapatalk
I'll bite :D My Jeep (and wife's Eagle) are in decent shape, but will probably grab something regardless.
Direct message sent with discount code!

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

Working on several different projects for 2023, the newest one is the stake pocket holes on the bed rails. The first test was pretty poor, and it's immediately evident that 3d printed forms aren't going to cut it for the steel sheet metal. I am also adjusting the blanks to improve the corners and trying to match the original pockets as much as possible. I hope to offer these with bed rail sections for repairing the top bed rail without having to buy an entire bedside. ImageImageImageImageImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

deckside
Posts: 40
Joined: Thu Aug 13, 2015 1:16 pm

Re: Remanufactured Speaker Grilles

Post by deckside »

SJohn wrote: Sat Nov 05, 2022 9:15 am Not 100% ready but close! FSJ and AMC rear door pull supports development nearing completion. Coming soon to Johnson Production

Johnsonproductionjp.com

ImageImage

Sent from my SM-G981V using Tapatalk
These are brilliant.

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

deckside wrote:
SJohn wrote: Sat Nov 05, 2022 9:15 am Not 100% ready but close! FSJ and AMC rear door pull supports development nearing completion. Coming soon to Johnson Production

Johnsonproductionjp.com

ImageImage

Sent from my SM-G981V using Tapatalk
These are brilliant.
Thank you, just got yourself 20% off.

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

Topic author
SJohn
Vendor
Posts: 283
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn »

J Truck bed stake pocket repair panels are now available on the website. https://www.johnsonproductionjp.com/sho ... pair-panel

Image
Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

jameshallmodel
Posts: 6
Joined: Tue Nov 15, 2016 6:22 pm

Re: Johnson production FSJ Parts

Post by jameshallmodel »

I bought your arm rest/door pull metal backing reinforcements. Great quality. You are doing good work and we need more like you in the community.
Post Reply