Johnson production FSJ Parts

Area for General FSJ related chat.

Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Mon Sep 05, 2022 3:32 pm

weeegoneeer wrote:
Sat Sep 03, 2022 10:52 am
Received mine today - super quality! Thank you again!
You're welcome! Thank you for your purchase!
Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Thu Sep 08, 2022 5:57 pm

I wanted to share the next product I have been working on, replacement arm rest supports. These replace the commonly cracked plastic support that screws into the back side of the arm rest. This is close to the final product, I hope to have them ready for purchase on the website in about a month.

ImageImageImage

Sent from my SM-G981V using Tapatalk
Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

User avatar

devildog80
Posts: 559
Joined: Wed Apr 13, 2022 2:41 pm
Location: Apache Junction AZ

Re: Remanufactured Speaker Grilles

Post by devildog80 » Fri Sep 09, 2022 3:07 pm

Nice :)
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Sat Oct 01, 2022 10:36 pm

Mounting tabs for the reproduced speaker grilles are now availableImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Mon Oct 17, 2022 8:27 am

More door pull supports in stock! Somewhere between editing the last drawing and ordering the new batch of blanks the center holes shifted 0.30 inches right, so i have redrilled the holes. Still fully functional just unsightly so they are at a discounted price again.

Also still have stickers and reproduction speaker grilles in stock!

Johnsonproductionjp.comImageImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Fri Oct 28, 2022 4:27 pm

Free shipping on U.S. orders over $100Image

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Sat Nov 05, 2022 9:15 am

Not 100% ready but close! FSJ and AMC rear door pull supports development nearing completion. Coming soon to Johnson Production

Johnsonproductionjp.com

ImageImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Thu Nov 17, 2022 8:00 am

I have started working on the CAD model for the newest product - sunvisor clips. End goal is an injection molded piece with the same texture and color as original.ImageImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Wed Nov 23, 2022 12:24 pm

Cyber Monday sale Monday 11/28Image

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Tue Dec 06, 2022 8:50 pm

Rear Door Pull supports for Wagoneers and Cherokees are in stock!

Johnsonproductionjp.com Image

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Fri Dec 09, 2022 6:59 pm

New sticker! Plus get a free Christmas sticker with every order until 2023 ImageImageImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Tue Dec 13, 2022 8:04 pm

Trim attachment tabs for Johnson Production front door pull supports are almost ready. These tabs will allow you to attach the plastic trim around your front door pulls to the JP aluminum door pull supports. Will be available within the next two weeks.

Johnsonproductionjp.com
ImageImageImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Fri Dec 16, 2022 11:10 am

Anyone reading these posts? First 3 people to reply get a 20% off discount code and free sticker.

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981

User avatar

dodgerammit
Posts: 1366
Joined: Wed Jan 11, 2017 11:20 pm
Location: Middle TN

Re: Remanufactured Speaker Grilles

Post by dodgerammit » Tue Dec 27, 2022 2:00 pm

SJohn wrote:
Fri Dec 16, 2022 11:10 am
Anyone reading these posts? First 3 people to reply get a 20% off discount code and free sticker.

Sent from my SM-G981V using Tapatalk
I'll bite :D My Jeep (and wife's Eagle) are in decent shape, but will probably grab something regardless.
84 Grand Waggy-Radio Flyer (Garnet Red/3M Ebony Metallic woodgrain, with honey interior) AMC 360 :cry: 2004 4.8LS/Advance Adapter/727/242 D44/AMC20 Serehill tailgate and headlight harnesses :fsj: Ongoing thread-https://www.fsjnetwork.com/forum/viewtopic.php?t=11897


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Tue Dec 27, 2022 2:42 pm

dodgerammit wrote:
SJohn wrote:
Fri Dec 16, 2022 11:10 am
Anyone reading these posts? First 3 people to reply get a 20% off discount code and free sticker.

Sent from my SM-G981V using Tapatalk
I'll bite :D My Jeep (and wife's Eagle) are in decent shape, but will probably grab something regardless.
Direct message sent with discount code!

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Thu Dec 29, 2022 9:35 pm

Working on several different projects for 2023, the newest one is the stake pocket holes on the bed rails. The first test was pretty poor, and it's immediately evident that 3d printed forms aren't going to cut it for the steel sheet metal. I am also adjusting the blanks to improve the corners and trying to match the original pockets as much as possible. I hope to offer these with bed rail sections for repairing the top bed rail without having to buy an entire bedside. ImageImageImageImageImage

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


deckside
Posts: 20
Joined: Thu Aug 13, 2015 1:16 pm

Re: Remanufactured Speaker Grilles

Post by deckside » Fri Dec 30, 2022 12:45 pm

SJohn wrote:
Sat Nov 05, 2022 9:15 am
Not 100% ready but close! FSJ and AMC rear door pull supports development nearing completion. Coming soon to Johnson Production

Johnsonproductionjp.com

ImageImage

Sent from my SM-G981V using Tapatalk
These are brilliant.


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Fri Dec 30, 2022 1:46 pm

deckside wrote:
SJohn wrote:
Sat Nov 05, 2022 9:15 am
Not 100% ready but close! FSJ and AMC rear door pull supports development nearing completion. Coming soon to Johnson Production

Johnsonproductionjp.com

ImageImage

Sent from my SM-G981V using Tapatalk
These are brilliant.
Thank you, just got yourself 20% off.

Sent from my SM-G981V using Tapatalk

Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


Topic author
SJohn
Posts: 156
Joined: Sun Nov 03, 2019 4:10 pm

Re: Remanufactured Speaker Grilles

Post by SJohn » Tue Jan 24, 2023 8:45 pm

J Truck bed stake pocket repair panels are now available on the website. https://www.johnsonproductionjp.com/sho ... pair-panel

Image
Owner/Operator/Chief Engineer of Johnson Production FSJ Parts
https://www.johnsonproductionjp.com/

1986 J20 LS Swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=17875

1981 Cherokee Chief - Rustard - 2JZ swap
https://www.fsjnetwork.com/forum/viewto ... 12&t=22981


jameshallmodel
Posts: 6
Joined: Tue Nov 15, 2016 6:22 pm

Re: Johnson production FSJ Parts

Post by jameshallmodel » Thu Feb 02, 2023 4:09 pm

I bought your arm rest/door pull metal backing reinforcements. Great quality. You are doing good work and we need more like you in the community.

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 2 guests