84 GW Power Front Seat Motor Replacement

Area for General FSJ related chat.
Post Reply

Topic author
84GW
Posts: 1
Joined: Thu Oct 06, 2022 8:29 pm

84 GW Power Front Seat Motor Replacement

Post by 84GW »

I have an 84 Grand Wagoneer and the power motors for the front seats have issues. There are three motors for the seats and the seats move forward, up, and down. They do not move back. Both sets of motors work very slowly and are rusted. I would like to just replace the seat motors, but cannot find the original part numbers anywhere, so I can’t find an available replacements. Any thoughts or ideas of how to track down the original part information and/or replacement parts?
User avatar

devildog80
Posts: 1176
Joined: Wed Apr 13, 2022 2:41 pm
Location: Apache Junction AZ

Re: 84 GW Power Front Seat Motor Replacement

Post by devildog80 »

Have you gone through and refurbished the switches yet?

Suggest you go through the motors too as they can be cleaned and revived.

My '84 GW is the same way the seat will go forward, but not back/up/down.

I did clean up a couple of the dash switches and was like a new switch.
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), Edelbrock clone 1406, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
Post Reply