Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Area to show off your Custom Build threads.
Topic author
az chip
Posts: 1433 Joined: Tue Jul 14, 2015 8:59 pm
Location: Mesa, AZ
Post
by az chip » Mon Feb 12, 2018 1:20 am
SJTD wrote: You got balls installing it without covering the holes. I'd have dropped in a bolt and a socket or two.
You know, I did not think of that at the time.
'81 Cherokee Chief 81 WT Chief/MSD 6/Holley Sniper/ Rusty 4" Spring lift/ Bulltear oil adapter/K&P Engineering Oil Filter/ NP 208/ Serehill Light Harness/KC LED Headlights/ Evil Twin Fab Roof Rack and sliders/ Ross mirror mounts.
sonoraed
Vendor
Posts: 674 Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:
Post
by sonoraed » Sun Mar 04, 2018 9:02 am
SJTD wrote: You got balls installing it without covering the holes. I'd have dropped in a bolt and a socket or two.
he works on airplanes you get used to not leaving things laying around where they shouldn't be!
Topic author
az chip
Posts: 1433 Joined: Tue Jul 14, 2015 8:59 pm
Location: Mesa, AZ
Post
by az chip » Sun Mar 04, 2018 3:39 pm
Yeah, well I still put tape over it. LOL
'81 Cherokee Chief 81 WT Chief/MSD 6/Holley Sniper/ Rusty 4" Spring lift/ Bulltear oil adapter/K&P Engineering Oil Filter/ NP 208/ Serehill Light Harness/KC LED Headlights/ Evil Twin Fab Roof Rack and sliders/ Ross mirror mounts.
Cheapthrills
Posts: 632 Joined: Wed Nov 02, 2016 7:09 am
Location: Sedalia colorado
Post
by Cheapthrills » Sun Mar 04, 2018 9:05 pm
That engine sure looks pretty.
Sent from my SM-N950U using Tapatalk
Topic author
az chip
Posts: 1433 Joined: Tue Jul 14, 2015 8:59 pm
Location: Mesa, AZ
Post
by az chip » Tue Mar 06, 2018 1:48 pm
Cheapthrills wrote: That engine sure looks pretty.
Sent from my SM-N950U using Tapatalk
I don't like oil leaks!
'81 Cherokee Chief 81 WT Chief/MSD 6/Holley Sniper/ Rusty 4" Spring lift/ Bulltear oil adapter/K&P Engineering Oil Filter/ NP 208/ Serehill Light Harness/KC LED Headlights/ Evil Twin Fab Roof Rack and sliders/ Ross mirror mounts.
Topic author
az chip
Posts: 1433 Joined: Tue Jul 14, 2015 8:59 pm
Location: Mesa, AZ
Post
by az chip » Tue Mar 06, 2018 1:57 pm
Last edited by
az chip on Tue Mar 06, 2018 1:57 pm, edited 1 time in total.
'81 Cherokee Chief 81 WT Chief/MSD 6/Holley Sniper/ Rusty 4" Spring lift/ Bulltear oil adapter/K&P Engineering Oil Filter/ NP 208/ Serehill Light Harness/KC LED Headlights/ Evil Twin Fab Roof Rack and sliders/ Ross mirror mounts.
will e
Posts: 5103 Joined: Sat Aug 18, 2012 8:21 am
Post
by will e » Tue Mar 06, 2018 8:13 pm
It sure makes for a clean looking install. Nice.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
bwwhaler
Posts: 224 Joined: Thu Oct 04, 2012 6:33 am
Location: Wilmington NC
Post
by bwwhaler » Wed Mar 07, 2018 6:12 pm
Sexy....
1987 GW 360/727/229 Performer intake Holley 670 32's 4" BJ's Springs CS-144 Serehill's light and tailgate harness
Topic author
az chip
Posts: 1433 Joined: Tue Jul 14, 2015 8:59 pm
Location: Mesa, AZ
Post
by az chip » Sun Mar 11, 2018 11:28 pm
Wish I had more time. I mocked up the in tank fuel pump. Hopefully finish that next weekend.
Sent from my iPhone using Tapatalk
'81 Cherokee Chief 81 WT Chief/MSD 6/Holley Sniper/ Rusty 4" Spring lift/ Bulltear oil adapter/K&P Engineering Oil Filter/ NP 208/ Serehill Light Harness/KC LED Headlights/ Evil Twin Fab Roof Rack and sliders/ Ross mirror mounts.
Topic author
az chip
Posts: 1433 Joined: Tue Jul 14, 2015 8:59 pm
Location: Mesa, AZ
Post
by az chip » Fri Mar 16, 2018 10:23 pm
Got the tank install finished. Thanks to Jerry i got to use an old tank like mine to mock up my pump system. Invaluable tool.
Sent from my iPhone using Tapatalk
'81 Cherokee Chief 81 WT Chief/MSD 6/Holley Sniper/ Rusty 4" Spring lift/ Bulltear oil adapter/K&P Engineering Oil Filter/ NP 208/ Serehill Light Harness/KC LED Headlights/ Evil Twin Fab Roof Rack and sliders/ Ross mirror mounts.
Cheapthrills
Posts: 632 Joined: Wed Nov 02, 2016 7:09 am
Location: Sedalia colorado
Post
by Cheapthrills » Fri Mar 16, 2018 10:32 pm
I like that a lot
Sent from my SM-N950U using Tapatalk
dodgerammit
Posts: 1445 Joined: Wed Jan 11, 2017 11:20 pm
Location: Middle TN
Post
by dodgerammit » Sat Mar 17, 2018 9:39 am
Very nice. Pretty much how my low pressure pump is already setup on mine to prevent vapor lock.
84 Grand Waggy-Radio Flyer (Garnet Red/3M Ebony Metallic woodgrain, with honey interior)
AMC 360 2004 4.8LS/Advance Adapter/727/242 D44/AMC20 Serehill tailgate and headlight harnesses
Ongoing thread-
viewtopic.php?t=11897
92 Wrangler Islander 4.0/32RH/231 D30/D35 RHD
Topic author
az chip
Posts: 1433 Joined: Tue Jul 14, 2015 8:59 pm
Location: Mesa, AZ
Post
by az chip » Sat Mar 17, 2018 10:27 am
dodgerammit wrote: Very nice. Pretty much how my low pressure pump is already setup on mine to prevent vapor lock.
How did you seal your holes?
'81 Cherokee Chief 81 WT Chief/MSD 6/Holley Sniper/ Rusty 4" Spring lift/ Bulltear oil adapter/K&P Engineering Oil Filter/ NP 208/ Serehill Light Harness/KC LED Headlights/ Evil Twin Fab Roof Rack and sliders/ Ross mirror mounts.
dodgerammit
Posts: 1445 Joined: Wed Jan 11, 2017 11:20 pm
Location: Middle TN
Post
by dodgerammit » Sat Mar 17, 2018 1:58 pm
I modded a factory sender with a ford low pressure pump from their early efi systems. Looks like the way you have attached that pump. I had no holes to seal. Used stock sending unit location.
84 Grand Waggy-Radio Flyer (Garnet Red/3M Ebony Metallic woodgrain, with honey interior)
AMC 360 2004 4.8LS/Advance Adapter/727/242 D44/AMC20 Serehill tailgate and headlight harnesses
Ongoing thread-
viewtopic.php?t=11897
92 Wrangler Islander 4.0/32RH/231 D30/D35 RHD
Topic author
az chip
Posts: 1433 Joined: Tue Jul 14, 2015 8:59 pm
Location: Mesa, AZ
Post
by az chip » Tue Mar 27, 2018 1:03 pm
'81 Cherokee Chief 81 WT Chief/MSD 6/Holley Sniper/ Rusty 4" Spring lift/ Bulltear oil adapter/K&P Engineering Oil Filter/ NP 208/ Serehill Light Harness/KC LED Headlights/ Evil Twin Fab Roof Rack and sliders/ Ross mirror mounts.
1979bettywhite
Posts: 547 Joined: Tue Jul 25, 2017 8:14 am
Post
by 1979bettywhite » Tue May 01, 2018 7:33 am
We need an update! Did you ever decide on bump stops, or determine how much is needed? Looking to upgrade mine sometime soon, but haven't had the chance to flex things out to determine where they need to be.
camerafinn
Posts: 17 Joined: Mon Jun 13, 2016 6:44 pm
Post
by camerafinn » Tue May 01, 2018 11:37 am
Hey, I just read the whole thread for the first time. Looks like you are doing some great work. I really like the sliders, makes me think I need to make some myself. It's pretty cool to learn everything as you go, isn't it? Mechanicals and suspension are awesome. Can't say the same about wiring though.
Are you planing to be at Ouray this year?
Keep it up.
Finn
You know it's a good morning when the gas gauge works for the whole drive.
1970.5 Gladiator J-4800 Camper Special Custom Cab - 55,000 Miles (Under Reconstruction)
1967 Jeepster Convertible - 8071 Deluxe - 65,000 Miles
Topic author
az chip
Posts: 1433 Joined: Tue Jul 14, 2015 8:59 pm
Location: Mesa, AZ
Post
by az chip » Sat May 12, 2018 5:57 pm
camerafinn wrote: Hey, I just read the whole thread for the first time. Looks like you are doing some great work. I really like the sliders, makes me think I need to make some myself. It's pretty cool to learn everything as you go, isn't it? Mechanicals and suspension are awesome. Can't say the same about wiring though.
Are you planing to be at Ouray this year?
Keep it up.
The sliders are Evil Twin Fab. Learning is a problem as I am a slow learner. Ouray might be an issue for me. Work schedule and changes in life are driving my time off.
'81 Cherokee Chief 81 WT Chief/MSD 6/Holley Sniper/ Rusty 4" Spring lift/ Bulltear oil adapter/K&P Engineering Oil Filter/ NP 208/ Serehill Light Harness/KC LED Headlights/ Evil Twin Fab Roof Rack and sliders/ Ross mirror mounts.
Topic author
az chip
Posts: 1433 Joined: Tue Jul 14, 2015 8:59 pm
Location: Mesa, AZ
Post
by az chip » Sun Oct 28, 2018 1:38 am
Lots going on. Not a lot of time for updates. All new brake lines. All new fuel lines. Just a lot of stuff
Sent from my iPhone using Tapatalk
'81 Cherokee Chief 81 WT Chief/MSD 6/Holley Sniper/ Rusty 4" Spring lift/ Bulltear oil adapter/K&P Engineering Oil Filter/ NP 208/ Serehill Light Harness/KC LED Headlights/ Evil Twin Fab Roof Rack and sliders/ Ross mirror mounts.
will e
Posts: 5103 Joined: Sat Aug 18, 2012 8:21 am
Post
by will e » Sun Oct 28, 2018 7:52 am
Looking good! Will you be taking it to TITD?
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge