Full Size Jeep Network

I know Scott has a dealer installed W/T fenders. Does anyone else? Any pics?

I'm trying to convert mine over.....

Thats only speculation based on info from ifsja. I don't know for sure. You're welcome to look at mine closer, just let me know when you want to come by.

So has nobody actually done the conversion?

Surely I won't be the first....

Blake wrote:So has nobody actually done the conversion?

Surely I won't be the first....

Oh there are lots of people that have done it. And in one of a few ways. Scotts is by far the cleanest I have seen.

One is they push the axle back. And have the front edge of the flare line up where the stock NT fenders did. Typically done with longer GM springs.

The other is cutting the flare and putting it on the door and keeping the axle in the stock location.

Another is cutting the door some to keep the axle in the stock location, but without having to cut the flare.

Good info.

My rear axle is currently in the stock location, but I do have the option to move it....

(3 FSJ's in one pic)

And here is what I'm working with.

I really don't wanna cut into my door...


You can barely see some black dots that I marked into the door. That's where I will need to cut, unless I move the axle and flare towards the rear.

I want flares! (

ScottsMojo wrote:I want flares! (

Yeah me too!

Tinkerjeep, dont know if he has joined over here, is working on the same thing. don't think his axle is in the stock location tho.

http://www.ifsja.org/forums/vb/showthre ... 943&page=3

Thanks for the link.

I wonder if he ever finished it...