Page 1 of 1

Adjusting electric choke

Posted: Fri Oct 05, 2012 2:35 pm
by Dumpy
Installed a Holley 600 CFM this summer, and now with the mornings getting colder it's time to set the choke. I'm assuming for it to open more slowly I just turn the dial to the right, correct?

Re: Adjusting electric choke

Posted: Fri Oct 05, 2012 3:57 pm
by AwesomeJ10
Yes, to the right.

http://www.holley.com/TechService/FAQ.a ... Carburetor


QUESTION How do I adjust the fast idle on my electric choke?
ANSWER To adjust the fast idle you will need to hold the throttle wide open (without the engine running). This will drop a lever under the choke housing with a 1/4" screw in it to slow it down. Turn it clockwise to speed it up turn it counter clockwise to slow it down.

Or just get TBI *-:)

Re: Adjusting electric choke

Posted: Sat Oct 06, 2012 6:43 am
by Dumpy
TBI will come:) just gotta wait on a few things til the wife gets done with school :geek: