Need Quick Help with my GW.

[KnoxvilleWag]

I'm changing the plugs and ignition wires on my 1989 GW. I accidentally unplugged 3 wires on what I think is the heater blower resistor, a set of connections on the engine side of the firewall just in front of the passenger. The wire colors are orange/black (still connected), yellow, green and light blue. I don't know which ones go to which connector. Here is a picture.
wire pic 3.jpgy

20130704_171336-1-1.jpg

If someone with a GWag can go take a quick look at theirs and let me know which wire is on top, middle and bottom, I would appreciate it. Thanks!

[KnoxvilleWag]

Bueller...anyone? I just need a quick answer from someone. Thanks much!

[tgreese]

This is for an '88 but it's likely the same.

http://oljeep.com/gw/elec/88/88_FSJ_Wir ... mPage4.jpg

The terminals should be numbered.

[KnoxvilleWag]

Here's a pic of the firewall under the hood on the passenger side. I've placed an orange arrow on the part I need someone to look at or just take a quick picture for me so I can know the proper place for the proper wires. It's a really easy request, thanks all!

wires firewall arrow2.jpg

[KnoxvilleWag]

This is for an '88 but it's likely the same.

http://oljeep.com/gw/elec/88/88_FSJ_Wir ... mPage4.jpg

The terminals should be numbered.

Thanks, I've studied this. I may be slow but I can't find what I need on this wiring diagram. Thanks for the help though. I was really hoping someone could just look at theirs real quick and let me know. Thanks again.

[tgreese]

"T" stands for trace, so ORG-T is orange with a stripe (trace).

[KnoxvilleWag]

Great. Thanks much!