Found this carb in the garage (Holley).

[Rollbar]

I forgot this was in there. Someone gave it to me.

I'm thinking of putting it on the CJ8 w/the 360 v8.

I have a Holley on it now but it has mechanical secondaries where as this one looks like vacuum secondaries.

Looks like a 600 cfm so it should go well w/the 360.

Air horn number is 6830 but I don't know the hook ups on it.

Would this fit a spread bore intake ?

Thanks,
Jim

ImageUploadedByTapatalk1371333001.222936.jpg

ImageUploadedByTapatalk1371333009.915110.jpg

ImageUploadedByTapatalk1371333018.346184.jpg

ImageUploadedByTapatalk1371333026.540044.jpg

ImageUploadedByTapatalk1371333034.748710.jpg

Sent from my iPhone 4S

[Rollbar]

ImageUploadedByTapatalk1371333057.663555.jpg

I guess I could put a rubber tube to these two points for off camber situations. ??

ImageUploadedByTapatalk1371333107.596209.jpg

Sent from my iPhone 4S

[jaber]

It looks like the same base as an Edelbrock. I get the universal 4bbl adapter from the McParts store and it goes on easily.

[FSJunkie]

It looks like the same base as an Edelbrock. I get the universal 4bbl adapter from the McParts store and it goes on easily.

....if they have one for the Motorcraft spread-bore pattern. Most carry the Rochester Spread-bore pattern (Quadrajet and maybe Thermoquad) adapter, and the Motorcraft spread-bore pattern is completely different.

[jaber]

It looks like the same base as an Edelbrock. I get the universal 4bbl adapter from the McParts store and it goes on easily.

....if they have one for the Motorcraft spread-bore pattern. Most carry the Rochester Spread-bore pattern (Quadrajet and maybe Thermoquad) adapter, and the Motorcraft spread-bore pattern is completely different.

I always got the universal one so it has several inserts to make it work.

[serehill]

Why would you put a spreadbore adaptor on a square bore carburator????