Clearing Out the FSJ Yard

[COjeeper]

I’m looking for an 87 heater box, any of those laying around?

[threepiece]

I’m looking for an 87 heater box, any of those laying around?

I have several boxes here but they are for AMC era. I can’t say for sure if there were any changes for the Grand Wagoneer but I think not.

[threepiece]

Hello, I apologize for not responding earlier to this. I don't know how I missed your message before now but I'm trying to catch up and hopefully still find some axles. Do you happen to still have those 82 axles? If so, do you also have any suggestions on how I could get them to Arizona for a reasonable cost?

Thanks and sorry again for the delayed response.

Hello, Do you have any 1980 or newer J10 axles available? I'm looking for the front with the driver side drop Dana 44, and the rear centered AMC 20. Thanks

I have been loading axles onto my truck headed to the scrap yard. The 1982 J10 axles happen to be on top of the pile. The front has the vacuum disconnect apparatus. Both axles for $80. You can have the control unit on the dashboard too.

Gosh I’m sure those axles no longer exist.

[threepiece]

Looking for a windshield for a 1977 J10
Can you help and ship?

I’m not shipping much at this time A windshield? Gosh I don’t think I will ever ship that.

[threepiece]

Threepeice..Do you have J series truck tail gate arms. The two arms for the tailgates. The guy wjo i bougjt my J10 from took the tailgate off before i arrived.. and took them off.. and forgot to give them to me.

So now i need them. Since my bed is nearly done being rebuilt

I’m not selling any J series bed parts at this time.

[threepiece]

I could use an air cleaner, in nice condition. Not sure how they changed over the years but I'd like one with less holes and less vacuum actuators, as I have converted to fuel injection. But I need the rectangular intake tube so i can connect to the stock fresh air hose in my 1980 wagoneer.

I am selling complete engines only sorry.

[threepiece]

Could definitely use some pieces. Got anything left?

Yes I have tons of parts here, literally.

[threepiece]

Do you have a dipstick for a turbo 400?

I have complete TH400 transmissions available.

[threepiece]

I am currently looking for a complete cab with doors.

I have several doors here but I won’t have access to them till later in the year.

[threepiece]

I read in an old post that you had tooling to make fender flares. Are you still making them? If not, what are your plans for the tooling?

Despite my efforts to be clear I do not make any parts for the fender flair. I do make patch panels for the lower part of the Widetrack/J-Series fender. These are available at BJ’s Full Size Jeep Parts. Or I can sell them direct if you pick them up from the Detroit area.

[89WoodyBlues]

I'm looking for wood grain trim for all four 1989 GW doors.

[argonaut]

This is very specific, but I need one of the chrome shoulder bolts that attaches the upper armrest to the bottom middle seat. One of mine stripped out when trying to dismantle my center seat for re-upholstery.

Otherwise I guess I might be looking for another whole center seat/arm rest...

[1414x]

any AC vent systems that go in place of the glove box?

[Milktruck]

Looking for driver door internals. Gear stripped off of mine so handle will not attach. Would need mailed.

Thank you

[devildog80]

Could be drilled through and put a roll pin in it?

[threepiece]

This is very specific, but I need one of the chrome shoulder bolts that attaches the upper armrest to the bottom middle seat. One of mine stripped out when trying to dismantle my center seat for re-upholstery.

Otherwise I guess I might be looking for another whole center seat/arm rest...

Gosh I don’t understand what you refer to here, “upper arm rest“ “bottom middle seat“ “chrome shoulder bolt” I am not familiar with these parts.

[threepiece]

I'm looking for wood grain trim for all four 1989 GW doors.

I may have doors from a late GW but I won’t be removing parts from them. Selling complete doors only unless I have the parts already on the shelf.

[fjs0001]

I need a passenger side door latch. I need the round older style. I think they switch to the crow feet style in 1980. Do you have one?

[TommyIronside]

Bolted to the hood, there's a bracket that retains the release cable to the hood with two bolts before it gets to the actual latch. I live in Waterford. So I'm not terribly far from you. And then without reading all the responses, looking for the elusive rhino grille. But that's a long shot I'm sure. Thank you sir.

[threepiece]

I need a passenger side door latch. I need the round older style. I think they switch to the crow feet style in 1980. Do you have one?

Yes, I have these but no shipping at this time.