Full Size Jeep Network

What should the single bolt that holds the compressor clutch to the compressor be torqued to on a 78 Wagoneer?
Thanks in advance.

Idunno without getting out the book but shop manuals are available on oljeep.com.

Per the york manual, it should be 20-25ft lbs (see page 9 in PDF below).

http://www.billavista.com/tech/pdf_inde ... Manual.pdf

Stuka wrote: ↑Thu Sep 29, 2022 6:49 am Per the york manual, it should be 20-25ft lbs (see page 9 in PDF below).

http://www.billavista.com/tech/pdf_inde ... Manual.pdf

billavista is a amazing website, wish I had that kind of time! Thanks Stuka

sonoraed wrote: ↑Thu Sep 29, 2022 7:57 am

Stuka wrote: ↑Thu Sep 29, 2022 6:49 am Per the york manual, it should be 20-25ft lbs (see page 9 in PDF below).

http://www.billavista.com/tech/pdf_inde ... Manual.pdf

billavista is a amazing website, wish I had that kind of time! Thanks Stuka

He's not bad for a Canadian Actually got to meet him once, he's a great dude and we'd have a bunch of tech data lost if it wasn't for his efforts

Yeah, that site is a huge resource. Lots of good articles and tech resources.

Stuka wrote: ↑Thu Sep 29, 2022 6:49 am Per the york manual, it should be 20-25ft lbs (see page 9 in PDF below).

http://www.billavista.com/tech/pdf_inde ... Manual.pdf

Thanks so much.