Here it is... SOA/SF on 33s with 2" body lift. (It's not on the jacks)
Body Lift Question
-
Mr. Goatman
Topic author - Posts: 201
- Joined: Tue Dec 18, 2012 6:31 pm
- Location: Alamogordo, NM
Body Lift Question
The directions from BJs are somewhat vague. The other mounts are pretty straightforward but the front core supports do not look right. There is an inner and outer rubber mount and the 2" "puck". The outer mount fits into the inner so I think this is the right way.... just does not look right... BTW, on the rest of the mounts the "puck" goes OVER the rubber. Anyone have some insight?
Here it is... SOA/SF on 33s with 2" body lift. (It's not on the jacks)
Here it is... SOA/SF on 33s with 2" body lift. (It's not on the jacks)
87 GW SOA/SF on 33"
87 Diesel Goat- Project Isuzu 4BD1T, 47RH, NP205 Front and Rear D60 5" Lift and 285-75x16 St Maxx
88 GW "Blue"- Next project! 6.2 GM/ 700R4, NP 203, Banks kit
87 Diesel Goat- Project Isuzu 4BD1T, 47RH, NP205 Front and Rear D60 5" Lift and 285-75x16 St Maxx
88 GW "Blue"- Next project! 6.2 GM/ 700R4, NP 203, Banks kit