Parts at ECI

For all discussions related to the annual East Coast Invasion
Post Reply
User avatar

Topic author
CheapJeepBrad
Posts: 300
Joined: Wed Mar 06, 2013 8:12 pm

Parts at ECI

Post by CheapJeepBrad »

I'm willing to bring parts from the hoard. big parts like seats or sheet metal, Intakes, carbs, wheels, etc.. Small parts like screws/bolts, knobs or badges. I also have lots of interior parts.

I'm looking for:

Locker
Tires 15" wheel 31-33s
d44 axles 4.09 gearing passenger drop
Cherokee Headliner,specifically rear piece (not waggy)
blue, black, spice(brown) or garnet Cherokee interior,
front winch bumper

Let me know.
Current FSJs:
79 Chief White/Russet
78 Chief orange/tan
FSJs Owned:
87 GW: Garnet/Oxblood
83 GW: Green/Peanut Butter
87 GW: Black/Oxblood
74 Cherokee NT: Blue/Brown
77 Chief:Tan/Garnet
87 GW: Silver/Oxblood
79 Cherokee Golden Eagle: Garnet/Tan
81 J10 blue/blue
77 Chief brown/tan
83 J10 Laredo: Red/Black
82 Cherokee: blue/black
User avatar

Greenmachine
Posts: 259
Joined: Fri Nov 07, 2014 8:59 pm
Location: Maryville TN

Re: Parts at ECI

Post by Greenmachine »

I could use a couple slots need 2 one for each truck (spares). I have a really nice aluminum radiator for a 6cyl and a Ford fan dual speed 2 fan with built in shroud I can bring if someone is interested. I bought both new and then went with a v8 radiator when I changed front clips. I'd say they have 0 miles but I did start and run both. Have my fuel tank and skid plate (poly aftermarket with new sender and pickup) out of my Cherokee I could bring as well. I swapped in a 31 gallon Chevy tank recently.
1975 Cherokee S factory 360,t-18, 4" hellcreek, slot mags 33" bfg's, performer intake, and Fitech fuel injection.
1980 J10 304, 5 spd, 4" Superlift, 4.88 Gears, 35" Maxxis Big Horns
1961 fc-150 fishing truck (on hold)

Former Air Cav
Post Reply