Going to Table Mesa on Saturday

FSJ Related Events in the Mountain Time Zone
Post Reply

Topic author
will e
Posts: 5155
Joined: Sat Aug 18, 2012 8:21 am

Going to Table Mesa on Saturday

Post by will e »

We are having an 'old iron' run.

You all are welcome to join!

http://www.virtualjeepclub.com/showthre ... sa-Nov-1st
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge

Locked and Loaded
Posts: 478
Joined: Wed Oct 03, 2012 7:57 pm

Re: Going to Table Mesa on Saturday

Post by Locked and Loaded »

I'll be there with bells on.
Drink more Water

Locked and Loaded
Posts: 478
Joined: Wed Oct 03, 2012 7:57 pm

Re: Going to Table Mesa on Saturday

Post by Locked and Loaded »

Drink more Water

Locked and Loaded
Posts: 478
Joined: Wed Oct 03, 2012 7:57 pm

Re: Going to Table Mesa on Saturday

Post by Locked and Loaded »

I got such a great response on the first video. I made a second one. Next week we are wheeling at the mall. I know you will like that, :D
http://www.youtube.com/watch?v=fMWeleiujLQ
Drink more Water

Topic author
will e
Posts: 5155
Joined: Sat Aug 18, 2012 8:21 am

Re: Going to Table Mesa on Saturday

Post by will e »

I watched all three. They just keep getting better!
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
User avatar

Tatsadasayago
Posts: 3684
Joined: Thu Aug 28, 2014 2:22 pm
Location: Sacramento, CA

Re: Going to Table Mesa on Saturday

Post by Tatsadasayago »

Nice underside view at the end of the first one! I felt like a perv peeking under your Cherokee's dress there :P

I admit I was all tensed up watch that fender get closer...closer...closer to that rock in the 2nd one. Very nice spotting job!
1977 Cherokee Chief - The Blair Jeep Project III
A collection of parts flying in close formation

Topic author
will e
Posts: 5155
Joined: Sat Aug 18, 2012 8:21 am

Re: Going to Table Mesa on Saturday

Post by will e »

Tatsadasayago wrote:Nice underside view at the end of the first one! I felt like a perv peeking under your Cherokee's dress there :P

I admit I was all tensed up watch that fender get closer...closer...closer TOO CLOSE to that rock in the 2nd one. Very nice spotting job!

I fixed it for ya. The front fender flare took a bit of a scrape. About as long as a pencil. When I saw what I had to fit through I kinda figured I wasn't going to come out unscathed.
I got a few small scrapes on the rear fenders as well at some other points in the trail but the front fender is the worse.
(Oh and the bumpers got their share too but that's what they are for). <<<< Thanks Bob!

At least I didn't do anything dumb like back into a rock or have my door dislocated from a stupid move...
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
User avatar

Tatsadasayago
Posts: 3684
Joined: Thu Aug 28, 2014 2:22 pm
Location: Sacramento, CA

Re: Going to Table Mesa on Saturday

Post by Tatsadasayago »

I noticed your driver's side nerf bar/slider took a pretty good hit. Paid for itself right there!

Great vids! Thanks for sharing.
1977 Cherokee Chief - The Blair Jeep Project III
A collection of parts flying in close formation
User avatar

Gumby
Posts: 1438
Joined: Sun Jan 29, 2012 10:20 am
Location: Tucson, AZ

Re: Going to Table Mesa on Saturday

Post by Gumby »

Man that looks like one sweet trip great job all around folks.
1984 GW 360/727/208.... 4"/ 31"
2004 CRD QC SRW 3500 4X4 (DD)
1983 "project Dubya" ... DEAD!
"Hole in my pocket"... 1974 Cherokee 360/400/QT

Topic author
will e
Posts: 5155
Joined: Sat Aug 18, 2012 8:21 am

Re: Going to Table Mesa on Saturday

Post by will e »

Another vid of the squeeze.... ;)

https://www.youtube.com/watch?v=2naxz6iTwEA
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
User avatar

Tad
Vendor
Posts: 2267
Joined: Fri May 13, 2011 4:08 am
Location: Southern AZ
Contact:

Re: Going to Table Mesa on Saturday

Post by Tad »

will e wrote:Another vid of the squeeze.... ;)

https://www.youtube.com/watch?v=2naxz6iTwEA
Looks like a nice MJ ;-)
A collection of 1966 to 1986 parts.
Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/locked front and rear/Hydroassist/39.5 Irocks
(Join date = Friday the 13th)

My Stuff:
http://www.ttsfabworks.com/
Tech Stuff:
IFSJA WMS Project
User avatar

rstep
Moderator
Posts: 1239
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: Going to Table Mesa on Saturday

Post by rstep »

Great video's guys ,glad you guys got out and had some fun.
1977 Cherokee Sold
I Don't own One
Stuff I Make.
http://fsjnetwork.com/forum/viewtopic.php?f=34&t=5620

Topic author
will e
Posts: 5155
Joined: Sat Aug 18, 2012 8:21 am

Re: Going to Table Mesa on Saturday

Post by will e »

It was nice. No rust. Some body damage (you can see he wasn't afraid to use it).

It's actually a good wheel'n platform. Thin and a decent wheelbase. It was fun to see one on the trail.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
Post Reply