Marchal mounts with 3-piece front bumper?

[bigwalton]

I got what I thought was the correct foglight mount for over the vertical nerf jobbers on my 3-piece front bumper (77 Cherokee), but there doesn't seem to be any bolt/hole to catch the bracket behind the bumper?

Are the different mounts for one piece vs. three piece bumpers? Do I need an additional piece?

I have the L or J looking mounts, I'll post a picture of what I have... tried searching and am coming up empty.

[fulsizjeep]

The fog or driving lamps were not a factory option until after AMC switched to 1 pc. bumper in 79. I have seen the top of the bumper guards on 3 pc. bumpers drilled for lamp mounting.

[bigwalton]

Well crap on a stick, that's not what I wanted to hear! Guess it's fabrication time then, drilling the top of those isn't acceptable for me

[HowardT64]

when my stock ones stopped working (have the original glass and all) I replaced
them with some SUPER halogen ones. Bolted them right to the spot where the
old ones were. I do need to take some loc-tite to the screws and such. Even the wife
said the look good. And those suckers are BRIGHT!!!!

Ill take a pic and show ya...

[bigwalton]

I just want to mount them above whatever these things are called.

ImageUploadedByTapatalk1378773546.242387.jpg

Here's what I have and where it falls. Looks like I need a piece of angle iron to come up off the bumper bolt to meet up with this thing.

ImageUploadedByTapatalk1378773589.406682.jpg

ImageUploadedByTapatalk1378773603.889739.jpg

[bigwalton]

The bracket isn't in the right location left to right in that last pic, it would fall directly above the bumper bolt like in the second picture.

[gopher_6_9]

Those mounts are for a 1 piece bumper..... angle iron is what I would use like you said.

[bigwalton]

Yeah, got that figured out. I'll get on this early next year.

[serehill]

Aluminum would make short work out of it. You can buy short stock at Home Depot.