I am on another forum, but it seems a little slow in the FSJ area so I thought I would join this site. It seems a bit busier. I thought I would start with my headliner replacement that I am working on. This is to replace a headliner that is shot and unusable. Moisture had got to this headliner while it sat for 8 years.
It seems that there is no source, within reason, for a new headliner. I know there were some ABS ones available at one time and a cardboard foam covered one that someone is making now. They seemed a bit spendy to me thought. I went down and bought two sheets of Coroplast from my local plastics dealer. Two sheets set me back $30.00. They were out of brown so I wound up with white. I do not know how close the brown would have been, but it would save on cost the paint if it was close.
I still had the original headliner so I was able to use it as a template. The passenger area panel is a bit longer than 4 feet so I had to graft two panels together. I used a tile divider moulding strip.
DSCF2422 small.jpg
f84ce2c2-b9ea-4d85-8f35-855d12d5ca0f_1000.jpg
DSCF2426 small.jpg
You do not have the required permissions to view the files attached to this post.