Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I am attempting to remove this worthless cruise control pieces and need to know where these wires and this vacuum hose go to
ImageUploadedByTapatalk1379024079.072670.jpg
This is where they start
ImageUploadedByTapatalk1379024122.439963.jpg
You do not have the required permissions to view the files attached to this post.
1972 Dodge Demon with a 451" stroker Big Block
1986 Jeep Grand Wagoneer AMC 360" AKA Golddigger- SOLD
2003 Dodge Crewcab 2500 Cummins longbed 4x4
2011 Jeep Grand Cherokee V-6 full time 4x4
Alternators, winches, 4x4, guns all have the same issue if you don't have any knowledge of them usually bad things will happen. Serehill
The black hose go to a vacuum release valve down on the brake peddle and the wire will unplug on the inside
of the dash. Why is it you think the cruise is no good. Some time it is just that valve on the brake peddle not holding vacuum. I just pulled the wiring harness from an 88 GW.
It's not all there and I can't locate the part I need
Even if I had the part I'm not sure where I'd hook it up on the Holley
1972 Dodge Demon with a 451" stroker Big Block
1986 Jeep Grand Wagoneer AMC 360" AKA Golddigger- SOLD
2003 Dodge Crewcab 2500 Cummins longbed 4x4
2011 Jeep Grand Cherokee V-6 full time 4x4
Alternators, winches, 4x4, guns all have the same issue if you don't have any knowledge of them usually bad things will happen. Serehill