Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
So I have a 1979 jeep j10 lwb and a 1989 GMC Jimmy like the old K5 blazers, and I need to sell them both to fund my other project (a 1983 jeep j10 honcho with an ls). I want to sell them together just to get them both out of the way. The 1979 j10 is rusty (floors, bed, fenders) but there is quite a bit of salvageable parts on it. We were planning on making an offroad buggy out of it by putting the orange truck body on the GMC frame because the tub of GMC is also rusty. The GMC has a 350 with a throttle body fuel injection that runs good and smooth without smoking or making any noise. Then we would bob the bed of the j10 since it’s rusty and lift the rig and put bigger tires on it. It wouldn’t be that hard but we need the space, I need the money, and I don’t have time. My brother is going to Arizona in the fall for college and is leaving his cars here so we are putting a storage unit with his cars in it where these two are currently parked. If you are interested, comment on this post or PM me. I’m asking 1500 for the pair. I would trade towards a rust free short bed box for a j10 for my 83. The j10 doesn’t have a seat and I’m keeping the black interior out of it. I will throw in a tan interior for a j10. The GMC interior is really nice, no tears in the seats, etc. I also have a new fuel tank and fuel pump for the GMC.
Sent from my iPhone using Tapatalk
1983 Jeep J10 Honcho SWB 5.3 4l60E NP241C viewtopic.php?f=12&t=22361
1979 Jeep J10 LWB (project/parts truck)
1989 GMC Jimmy (project)
Jeep Lover for life
Oh I forgot to mention the GMC also doesn’t have doors or a grille. And yes I posted this in the parts sales because I accidentally posted it in the wrong page.
Sent from my iPhone using Tapatalk
1983 Jeep J10 Honcho SWB 5.3 4l60E NP241C viewtopic.php?f=12&t=22361
1979 Jeep J10 LWB (project/parts truck)
1989 GMC Jimmy (project)
Jeep Lover for life
In my listing I said the orange truck was rusty, but it is fixable. The visor above the windshield is incredibly and surprisingly solid. The floors are fixable if you get replacements for the footwells on both sides. The cab corners aren’t too bad, for a offroad toy they would be ok, otherwise you would want to replace them. Fenders are also fixable, no massive holes anywhere.
Sent from my iPhone using Tapatalk
1983 Jeep J10 Honcho SWB 5.3 4l60E NP241C viewtopic.php?f=12&t=22361
1979 Jeep J10 LWB (project/parts truck)
1989 GMC Jimmy (project)
Jeep Lover for life
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
thej10guy wrote: ↑Tue Jun 07, 2022 6:55 pm
Yeah thats a problem I feel like no one on this forum is located even close to where I am. I feel like every one is down south, out east, or out west.
Sent from my iPhone using Tapatalk
Yep that's the truth LOL
The bus I ride is so short it is a yellow Smart Car full of squirrels, monkeys and clowns.
Seems like it, but if more would fill in the "Location" box on their profile, you would be surprised how close others are to you.
And more often they travel right through your town, not even realizing you are there.
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
The truck has a 3 speed manual transmission (T-18 maybe?). I am located on the West side of Wisconsin right on the Mississippi. I am on the outskirts of La Crosse if you know where that is.
Sent from my iPhone using Tapatalk
1983 Jeep J10 Honcho SWB 5.3 4l60E NP241C viewtopic.php?f=12&t=22361
1979 Jeep J10 LWB (project/parts truck)
1989 GMC Jimmy (project)
Jeep Lover for life
Not that far away. Only 12hrs from me. Im over in eastern montana on the edge of the middle of nowhere! Need to see if my accountant will let me have some money to spend on another jeep!
I forgot to mention, the GMC does run and move under its own power. The j10 doesn’t run (anymore because it has no engine) but it ran well and the transmission and axles all were smooth with no grinding sounds of any sort.
Sent from my iPhone using Tapatalk
1983 Jeep J10 Honcho SWB 5.3 4l60E NP241C viewtopic.php?f=12&t=22361
1979 Jeep J10 LWB (project/parts truck)
1989 GMC Jimmy (project)
Jeep Lover for life
Bump. I still am looking to sell these and they will most likely get scrapped if I don’t sell them. The gmc still runs well, doesn’t smoke at all. It’s got a th400 with an np241. 4wd and all gears work. Make an offer, I don’t want to scrap them but I need some money and some space.
Sent from my iPhone using Tapatalk
1983 Jeep J10 Honcho SWB 5.3 4l60E NP241C viewtopic.php?f=12&t=22361
1979 Jeep J10 LWB (project/parts truck)
1989 GMC Jimmy (project)
Jeep Lover for life
thej10guy wrote: ↑Tue Jun 07, 2022 6:55 pm
Yeah thats a problem I feel like no one on this forum is located even close to where I am. I feel like every one is down south, out east, or out west.
Sent from my iPhone using Tapatalk
Hey, a few of us are north
Didn't realize the GMC had that blue interior...those seats are awesome...