Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I’ll look in the shop in the morning, I’m sure I have some.
A collection of 1966 to 1986 parts. Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/locked front and rear/Hydroassist/39.5 Irocks (Join date = Friday the 13th)
will e wrote:I think I have some. I will take a picture and post it to make sure it is what you are looking for.
Thanks.
Sent from my SM-F711U using Tapatalk
Sorry, got side tracked. Here is a picture of what I have. I bought these off of Flint years ago, they came off of a 'passenger side drop' rig with a dana 44. I ended up not using them when I tossed a different axle in the front.
will e wrote:I think I have some. I will take a picture and post it to make sure it is what you are looking for.
Thanks.
Sent from my SM-F711U using Tapatalk
Sorry, got side tracked. Here is a picture of what I have. I bought these off of Flint years ago, they came off of a 'passenger side drop' rig with a dana 44. I ended up not using them when I tossed a different axle in the front.
Thanks for the pic. I haven’t seen a set in over a decade, what’s the post on it for, sway bar? My axle has factory shock mounts on it. How much do yo want for them?
1972 J2000
“You have enemies? Good. That means you've stood up for something, sometime in your life.”
-Winston Churchill
"Just because I don't care doesn't mean I don't understand."
-Homer Simpson
UPDATE: It looks like you are doing a SOA/SF (I saw your post in 'what have you done to your jeep'.)
If that's the case I think you actually need spring plates from a drivers drop rig, not a passenger drop rig. When you do the SOA the plates go on 'upside down' but still have to be on the right/left side. This puts the sway bar connection in the wrong place. It's why I bought these, I had a driver drop and did a SOA and the sway bar connections were in the wrong place. You might post up in the regular board and verify this.
I am not using them so how about $10 for the trouble plus the cost of the ride? I can probably get them into either a small or medium flat rate box, so figure $10 or $16 for the ride. $20 or $26 total.
If that works, send me a PM. I don't do paypal or whatever so you can send me a check (or money order or whatever) once you receive the parts.
will e wrote:UPDATE: It looks like you are doing a SOA/SF (I saw your post in 'what have you done to your jeep'.)
If that's the case I think you actually need spring plates from a drivers drop rig, not a passenger drop rig. When you do the SOA the plates go on 'upside down' but still have to be on the right/left side. This puts the sway bar connection in the wrong place. It's why I bought these, I had a driver drop and did a SOA and the sway bar connections were in the wrong place. You might post up in the regular board and verify this.
I am not using them so how about $10 for the trouble plus the cost of the ride? I can probably get them into either a small or medium flat rate box, so figure $10 or $16 for the ride. $20 or $26 total.
If that works, send me a PM. I don't do paypal or whatever so you can send me a check (or money order or whatever) once you receive the parts.
PM sent.
Sent from my SM-F711U using Tapatalk
1972 J2000
“You have enemies? Good. That means you've stood up for something, sometime in your life.”
-Winston Churchill
"Just because I don't care doesn't mean I don't understand."
-Homer Simpson
will e wrote: ↑Sat Aug 06, 2022 11:13 amUPDATE: It looks like you are doing a SOA/SF (I saw your post in 'what have you done to your jeep'.)
If that's the case I think you actually need spring plates from a drivers drop rig, not a passenger drop rig. When you do the SOA the plates go on 'upside down' but still have to be on the right/left side. This puts the sway bar connection in the wrong place. It's why I bought these, I had a driver drop and did a SOA and the sway bar connections were in the wrong place. You might post up in the regular board and verify this.
I am not using them so how about $10 for the trouble plus the cost of the ride? I can probably get them into either a small or medium flat rate box, so figure $10 or $16 for the ride. $20 or $26 total.
If that works, send me a PM. I don't do paypal or whatever so you can send me a check (or money order or whatever) once you receive the parts.
74-79 spring plates and 80+ springs plates are not cross compatible as the u-bolt dimensions changed. The sway bar plate can be modified, but the plate itself has to be retained.
Sorry, I don’t get notifications from here and I’m coming off some surgery from early August.
Stuka is partially correct in that 79 and older spring plates are different than 80+ plates.
To my knowledge 79 was the only passenger drop year to have an integral spring plate that incorporates the sway bar mounts (besides the 80+ plates) the older 78 and down spring plates with a sway bar piece were 2-piece like Mikie showed and I’ve never seen a stock sway bar setup on a 75 and older rig.
A collection of 1966 to 1986 parts. Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/locked front and rear/Hydroassist/39.5 Irocks (Join date = Friday the 13th)
Hey Tad, I hope the surgery went well. I sent him those plates and he's going to install them tomorrow. He's using them on a different rig than his SOA and says they will work.