Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Next is to make the exhaust system to fit cast manifold. I have got parts for 2 1/4" single pipe all the way. Will this be enough for the 304? From what I could find out, this seemed to be stock size for 304 engines, and I am not sure if there is a need for step up to 2 1/2" pipe from the 'Y' joint where the two sides meet under the T case just before they go into the muffler. I hope the oval TurboFlow muffler is big enough at 16" x 12" x 6".
Weld together exhaust parts.jpg
You do not have the required permissions to view the files attached to this post.
'76 Cherokee Chief AMC304, TH400, QT, Dana 44F, Dana 60 R. = Under restoration right now
'82 J20 AMC258 4.2, T18a, NP208, Dana 44F, Dana 60 R. = 3x J20 truck waiting for restoration next
'76 Cherokee Chief AMC304, TH400, QT, Dana 44F, Dana 60 R. = Under restoration right now
'82 J20 AMC258 4.2, T18a, NP208, Dana 44F, Dana 60 R. = 3x J20 truck waiting for restoration next