For those who wanted more pictures of how the cage works here you go.
Their are three disconnects on each side at the B piller. The A piller and halo are one piece. B and C are separated by removing the top cross bars and the angled bars. Most come out easily but you have to throw a rachet strap around the A piller to squeeze it out the back
42.jpg
The A piller had to be made of 2 pieces to get the bends tight enough. Then just weld them together
40.jpg
all pillars meet up with the frame parts on the body and are sandwiched with plates. The top plates are welded to the cage and the bottom plates are welded to the body. makes lining things up easy.
41.jpg
eventually I plan to tie the bottom plates into the frame and add some sliders off of them but for now this works.
I should also note that the A pillars are kind in the way of the window cranks. For now I have to open the door to roll up or down the windows but I will eventually find some shorter crank arms. only need about a half an inch or so to clear them.
You do not have the required permissions to view the files attached to this post.
I have no idea what I'm doing.