Interior question

Area for General NON-Jeep related chat. Topics are typically not moderated, but must fall within the Use Guidelines.
Post Reply
User avatar

Topic author
Jguess85
Posts: 62
Joined: Mon Oct 28, 2019 12:02 pm

Interior question

Post by Jguess85 »

On the 81 chief I have been going back and forth if I should paint the metal part of the bottom dash that is metal. Right now I think it has some surface rust starting to show. Have any of y’all experienced this?I’ve tried cleaning it but only uses windex. What would you guys do?

ShagWagon
Posts: 702
Joined: Tue Apr 19, 2016 8:13 pm

Re: Interior question

Post by ShagWagon »

Mineral oil, marvel mystery oil or wd40 till you can paint it. I would just put some on a cotton ball or paper towel and give a thin coat. Probably look good shiny.

Just a guess I could be wrong but it’s rusting.
87 Grand Wagoneer Rebuilt 360 by S&J, Fitech GO EFI 600, Novak in-tank fuel pump, Skyjacker Hydro 4" lift, BFG AT KO2 30", Dynamax Muffler, MSD distributor, MSD ignition, Edlebrock perf 4bbl intake, Elgin perf cam, Oil tube mod, Roller rockers, chrome molly lifters, HD alum radiator, Powermaster 150/100 alt, Alum HD water pump, Serhills tailgate harness, Cowl screen mod, Evil Twin grab handles, Rstep's custom AMC door lock knobs, all electrical works.
User avatar

FLeetFox
Posts: 243
Joined: Tue Apr 17, 2018 7:05 am
Location: Blue Ridge Mtns

Re: Interior question

Post by FLeetFox »

I have been using a small airbrush set up for detail work. inexpensive, precise and very little overspray.

Fleet Fox
I do things my way, and I pay a high price.... JCM
User avatar

Don S
Posts: 212
Joined: Tue Aug 23, 2011 7:33 pm
Location: Near Burleson Tx

Re: Interior question

Post by Don S »

..

I used WD-40 in and on the barrels of black powder guns... they rusted!

Good Luck.. Don S..
Post Reply