Hi all,
hope you re fine despite virus.
few days ago, the problem began so i suspected a air leak before fuel pump. I found that the feed nipple of the pump was loose, i fixed that but it was better i was able to accelerate but engine started to die just after. So i removed my manual pump and install an electric one. same problem...
i have removed the motocraft to check it. there was a lot thick translucide water stuff in the carb bowl, so i cleaned it spray so air inside. the problem is that the gaskets are slightly damaged, not broken but i don't have any rebuild kit with me, can use some gasket sealant between gaskets and carb ?
any suggestion ?
thanks
Tara