In light of recent events, I have decided to look for a 360 that I can pull apart and rebuild. The works; paint it, do a total rebuild, then swap out my current engine when it fails and repeat the process.
Can anyone think of a place that I could pick up an old 360?
Engine Search
-
HowardT64
Topic author - Posts: 1536
- Joined: Sun May 05, 2013 2:47 am
- Location: Athens,Texas
Engine Search
2016 Jeep Patriot
"Faith"
"Faith"
-
dodgerammit
- Posts: 1444
- Joined: Wed Jan 11, 2017 11:20 pm
- Location: Middle TN
Re: Engine Search
FB on their grand wagoneer or FSJ pages always has the LS fanboys unloading them for cheap. Most of them running ok when pulled. I've seen whole drivelines (360/727/229) for as little as $200
84 Grand Waggy-Radio Flyer (Garnet Red/3M Ebony Metallic woodgrain, with honey interior) AMC 360 
2004 4.8LS/Advance Adapter/727/242 D44/AMC20 Serehill tailgate and headlight harnesses 
Ongoing thread-viewtopic.php?t=11897
92 Wrangler Islander 4.0/32RH/231 D30/D35 RHD
2004 4.8LS/Advance Adapter/727/242 D44/AMC20 Serehill tailgate and headlight harnesses Ongoing thread-viewtopic.php?t=1189792 Wrangler Islander 4.0/32RH/231 D30/D35 RHD
-
tedlovesjeeps71
- Posts: 2905
- Joined: Fri Jul 22, 2016 4:39 pm
Re: Engine Search
It would be a bit of a drive for ya but I have a few. Two have been torn down. One is a “runner” that still has the tranny/t-case attached.HowardT64 wrote:In light of recent events, I have decided to look for a 360 that I can pull apart and rebuild. The works; paint it, do a total rebuild, then swap out my current engine when it fails and repeat the process.
Can anyone think of a place that I could pick up an old 360?
-
Phils67
- Posts: 1011
- Joined: Sat Mar 24, 2018 3:11 pm
Re: Engine Search
Where are you located? I've been toying with doing a 360 swap in my MJ.tedlovesjeeps71 wrote: ↑Mon Apr 06, 2020 1:33 pm
It would be a bit of a drive for ya but I have a few. Two have been torn down. One is a “runner” that still has the tranny/t-case attached.
1967 Gladiator J2000, 1998 4.0L OBD2, T18, D20 twin sticks, D44HD/D60, Detroit lockers, 3.73s, 4wheel disc brake, FSSR, Dakota digital, etc.
-
tedlovesjeeps71
- Posts: 2905
- Joined: Fri Jul 22, 2016 4:39 pm
Re: Engine Search
East of Colorado Springs.
You’d have to do a lot of unibody reinforcement to hold up to a V8.
You’d have to do a lot of unibody reinforcement to hold up to a V8.
-
Phils67
- Posts: 1011
- Joined: Sat Mar 24, 2018 3:11 pm
Re: Engine Search
That's a little far for me also lol
1967 Gladiator J2000, 1998 4.0L OBD2, T18, D20 twin sticks, D44HD/D60, Detroit lockers, 3.73s, 4wheel disc brake, FSSR, Dakota digital, etc.
-
gilbedw
- Posts: 42
- Joined: Mon Jul 29, 2019 2:36 pm
Re: Engine Search
I have one that is disassembled and looks rebuildable Located West of Ft. Worth.
-
HowardT64
Topic author - Posts: 1536
- Joined: Sun May 05, 2013 2:47 am
- Location: Athens,Texas
Re: Engine Search
Let me get with my buddy and ill let ya know
What would you want for it?
2016 Jeep Patriot
"Faith"
"Faith"
-
gilbedw
- Posts: 42
- Joined: Mon Jul 29, 2019 2:36 pm
Re: Engine Search
Negotiable. If you decide you are interested PM me .
-
HowardT64
Topic author - Posts: 1536
- Joined: Sun May 05, 2013 2:47 am
- Location: Athens,Texas