12V distribution blocks

Grand_Wag_85 · Post by **Grand_Wag_85** » Mon Jan 20, 2020 5:36 pm

I desperately have to rewire all 3 of my J trucks. I'll be using the BJ's style 21 circuit kit but I'm hung up on the distribution blocks for 12V with a good AMP rating. The goal is to have the battery directly feed the distribution block and have the block feed the solenoid. The alternator, fuel injection and main wiring harness will all draw from the distribution block as well.

What are you guys using?

I saw these on Amazon but am unsure if they would hold up. The posts are 3/8" like the solenoid.

rocklaurence · Post by **rocklaurence** » Tue Jan 21, 2020 5:45 am

Im using exactly those blocks. I have one with the 3/8" studs on one truck and the other has 1/4" studs and smaller lugs to add in-line fuses.

Post by **fulsizjeep** » Tue Jan 21, 2020 5:57 am

That appears to be way too shiny for an old Jeep.

Grand_Wag_85 · Post by **Grand_Wag_85** » Tue Jan 21, 2020 1:12 pm

fulsizjeep wrote: ↑Tue Jan 21, 2020 5:57 am That appears to be way too shiny for an old Jeep.

LOL my 82 is way too shiny for crappy wiring

Post by **fulsizjeep** » Tue Jan 21, 2020 2:55 pm

10-4 !!!

Full Size Jeep Network

12V distribution blocks

12V distribution blocks

Re: 12V distribution blocks

Re: 12V distribution blocks

Re: 12V distribution blocks

Re: 12V distribution blocks