Just purchased a 1970 1414X wagoneer

Area for General FSJ related chat.
Post Reply
User avatar

Chubbinius
Posts: 351
Joined: Thu Aug 16, 2018 11:33 am
Location: SD, CA

Re: Just purchased a 1970 1414X wagoneer

Post by Chubbinius »

JVDL1414x wrote: ↑Mon Sep 09, 2019 10:36 am Is there an in line fuel filter anywhere on these?

Anyone know where I can get a service or shop manual for my 1970 wagoneer?
Fuel filters may be on the driver's side frame rail between the tank and the engine, or some are hanging vertically along the front of the engine block front driver's side above the mech fuel pump (where mine was located when I purchased the vehicle...I still want to relocate mine).

As for the Factory/Technical Service manuals , Rockauto has the digital version: https://www.rockauto.com/en/moreinfo.ph ... 92&jsn=377

Faxon has digital and print versions here: http://www.faxonautoliterature.com/Search.aspx?c=32219

or you can ask in the Wanted section too, some folks have copies they will sell for less.
1970 1414X Wagoneer "The Pig"
-Custom Special
-Dauntless 350 V8
-D27 front/D44 rear
2006 XK (65th Ann Edition)-DD
Top

Topic author
JVDL1414x
Posts: 34
Joined: Sun Sep 08, 2019 8:53 am

Re: Just purchased a 1970 1414X wagoneer

Post by JVDL1414x »

Thank you!

Sent from my SM-G892A using Tapatalk

Top
User avatar

66stepside
Posts: 3793
Joined: Sat Oct 13, 2012 9:59 pm
Location: Spokane Valley, WA.

Re: Just purchased a 1970 1414X wagoneer

Post by 66stepside »

JVDL1414x wrote:Sorry, it was 66 stepside who got me to tapatalk. Thank you!

Sent from my SM-G892A using Tapatalk

You are welcome- we all come here to learn!


Sent from my iPhone using Tapatalk
Top

letank
Posts: 4030
Joined: Wed Oct 03, 2012 9:16 pm
Location: SF bay area

Re: Just purchased a 1970 1414X wagoneer

Post by letank »

link to the parts catalog for 62 to 73, no TSM for the 70 model

http://oljeep.com/parts_man/62-73_FSJ_P ... g_w_bm.pdf
Michel
74 wag (349 Kmiles... parked, next step is a rust free body)
85 Gwag (229 Kmiles... the running test lab)
Top

Topic author
JVDL1414x
Posts: 34
Joined: Sun Sep 08, 2019 8:53 am

Re: Just purchased a 1970 1414X wagoneer

Post by JVDL1414x »

What is a TSM? I'm guessing technical service manual, but I'm not sure.

Sent from my SM-G892A using Tapatalk

Top
User avatar

Chubbinius
Posts: 351
Joined: Thu Aug 16, 2018 11:33 am
Location: SD, CA

Re: Just purchased a 1970 1414X wagoneer

Post by Chubbinius »

JVDL1414x wrote: ↑Mon Sep 09, 2019 4:00 pm What is a TSM? I'm guessing technical service manual, but I'm not sure.

Sent from my SM-G892A using Tapatalk
You are correct, sir!
1970 1414X Wagoneer "The Pig"
-Custom Special
-Dauntless 350 V8
-D27 front/D44 rear
2006 XK (65th Ann Edition)-DD
Top

will e
Posts: 5103
Joined: Sat Aug 18, 2012 8:21 am

Re: Just purchased a 1970 1414X wagoneer

Post by will e »

JVDL1414x wrote: ↑Mon Sep 09, 2019 9:47 am I doubt I can find the little clock that mounted on the console..

That's where the second $2000 will go. ;) Watch here, sometimes they pop up. And folks keep an eye out for them and post up if they are selling on on ebay and such.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
Top

Topic author
JVDL1414x
Posts: 34
Joined: Sun Sep 08, 2019 8:53 am

Re: Just purchased a 1970 1414X wagoneer

Post by JVDL1414x »

Good to know. I will be watching...... Not sure I would fork over $2K for one, as I wear a watch lol
Top

twisted frame
Posts: 637
Joined: Wed Mar 27, 2013 9:41 am
Location: Massachusetts

Re: Just purchased a 1970 1414X wagoneer

Post by twisted frame »

I am in awe of that black interior. Nice find!
73 J4000. 360, MC 2100, T18A, D20, stock closed knuckle Dana 44 front, 60-2 rear. Warn Lock-O-Matics, Warn/Belleview electric winch, true duals with glasspacks, old-school front diff skid plate, used 265 Toyos on 16" AR wheels.
Top
User avatar

tgreese
Posts: 7195
Joined: Fri Jun 08, 2012 6:31 am
Location: Medford MA USA

Re: Just purchased a 1970 1414X wagoneer

Post by tgreese »

Looks like they are not being reproduced. You could try Faxon in Riverside CA ... maybe they can locate one for you. Won't be cheap.

Oops, already posted.

Nice Wagoneer!
Tim Reese
Maine beekeeper's truck: '77 J10 LWB, 258/T15/D20/3.54 bone stock, low options (delete radio), PS/PDB, hubcaps.
Browless and proud: '82 J20 360/T18/NP208/3.73, Destination A/Ts, 7600 GVWR
Copper Polly: '75 CJ-6, 304/T15, PS, BFG KM2s, soft top
GTI without the badges: '95 VW Golf Sport 2000cc 2D
Dual Everything: '15 Chryco Jeep Cherokee KL Trailhawk, ECO Green
Blockchain the vote.
Top

Topic author
JVDL1414x
Posts: 34
Joined: Sun Sep 08, 2019 8:53 am

Re: Just purchased a 1970 1414X wagoneer

Post by JVDL1414x »

Thank you for the information. I'll start wrenching this weekend to address some hard start issues. I suspect the diaphragm in the fuel pump is damaged, and fuel filter. While I'm at it, I'll change out plug wires, spark plugs (properly gapped) and set the timing.

Anyone know the gap for plugs on these 350 dauntless motors and timing procedure?

Sent from my SM-G892A using Tapatalk

Top

Topic author
JVDL1414x
Posts: 34
Joined: Sun Sep 08, 2019 8:53 am

Re: Just purchased a 1970 1414X wagoneer

Post by JVDL1414x »

Found these behind the back seat. Anyone know if they are correct for a 1970 Wagoneer?Image

Sent from my SM-G892A using Tapatalk

Top
User avatar

Chubbinius
Posts: 351
Joined: Thu Aug 16, 2018 11:33 am
Location: SD, CA

Re: Just purchased a 1970 1414X wagoneer

Post by Chubbinius »

JVDL1414x wrote: ↑Tue Sep 10, 2019 6:45 am
Anyone know the gap for plugs on these 350 dauntless motors and timing procedure?
If using standard copper core plugs (R45TS), the Sun tune-up card for the Buick 350 shows a gap of .030" and a torque of 15 ft/lbs.

That is an awesome thing to find behind the seat, those look like they would be absolutely perfect on a set of whitewalls! You really nabbed a nice one!
1970 1414X Wagoneer "The Pig"
-Custom Special
-Dauntless 350 V8
-D27 front/D44 rear
2006 XK (65th Ann Edition)-DD
Top

Topic author
JVDL1414x
Posts: 34
Joined: Sun Sep 08, 2019 8:53 am

Re: Just purchased a 1970 1414X wagoneer

Post by JVDL1414x »

Thanks Chubbinius for the info. I will have to locate some original steel wheels for the rig, so I can put them on. How is your waggy coming along? You're in SD right? I'm in Grass Valley, CA.

Sent from my SM-G892A using Tapatalk

Top
User avatar

Chubbinius
Posts: 351
Joined: Thu Aug 16, 2018 11:33 am
Location: SD, CA

Re: Just purchased a 1970 1414X wagoneer

Post by Chubbinius »

JVDL1414x wrote: ↑Tue Sep 10, 2019 8:08 am Thanks Chubbinius for the info. I will have to locate some original steel wheels for the rig, so I can put them on. How is your waggy coming along? You're in SD right? I'm in Grass Valley, CA.
Glad to be able to offer some help, like so many on here have done and have helped me as well.

Yup, in San Diego. Mine is back up and running. Had to do some wiring work and replace the starter. I am still desperately hoping to come across a console to put back into mine...that's why I am admiring yours so much! Grass Valley is a ways up there, a hour or two west of Tahoe, right?
1970 1414X Wagoneer "The Pig"
-Custom Special
-Dauntless 350 V8
-D27 front/D44 rear
2006 XK (65th Ann Edition)-DD
Top

Topic author
JVDL1414x
Posts: 34
Joined: Sun Sep 08, 2019 8:53 am

Re: Just purchased a 1970 1414X wagoneer

Post by JVDL1414x »

Yes, about an hour west of Tahoe. I'll keep my eyes open for one. Anything else you need?

Sent from my SM-G892A using Tapatalk

Top
User avatar

toothofwar
Posts: 354
Joined: Sun Apr 22, 2018 7:38 am

Re: Just purchased a 1970 1414X wagoneer

Post by toothofwar »

Absolutely beautiful rig! Great color combo and minimal to no rust. I am extremely jealous!

Sent from my SM-N950U using Tapatalk

Top

Topic author
JVDL1414x
Posts: 34
Joined: Sun Sep 08, 2019 8:53 am

Re: Just purchased a 1970 1414X wagoneer

Post by JVDL1414x »

Found some more itemsImageImage

Sent from my SM-G892A using Tapatalk

Top

Topic author
JVDL1414x
Posts: 34
Joined: Sun Sep 08, 2019 8:53 am

Re: Just purchased a 1970 1414X wagoneer

Post by JVDL1414x »

Learning more and more....glad all this was still in the vehicle.ImageImageImageImage

Sent from my SM-G892A using Tapatalk

Top

Topic author
JVDL1414x
Posts: 34
Joined: Sun Sep 08, 2019 8:53 am

Re: Just purchased a 1970 1414X wagoneer

Post by JVDL1414x »

Anyone know what this is for? Owners manual does not reference it.Image

Sent from my SM-G892A using Tapatalk

Top
Post Reply

Return to “General FSJ”