Clutch torque

Area for stock and aftermarket air conditioning.
Post Reply

Topic author
Horsman
Posts: 62
Joined: Thu Nov 25, 2021 7:36 pm
Location: North Texas

Clutch torque

Post by Horsman »

What should the single bolt that holds the compressor clutch to the compressor be torqued to on a 78 Wagoneer?
Thanks in advance.
Jeff Horsman
1979 Jeep Wagoneer
1967 Pontiac 2+2

SJTD
Posts: 1916
Joined: Tue May 21, 2013 12:02 pm
Location: Lompoc, Sunland or somewhere between

Re: Clutch torque

Post by SJTD »

Idunno without getting out the book but shop manuals are available on oljeep.com.
Sic friatur crustulum

'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.
User avatar

Stuka
Site Admin
Posts: 11772
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: Clutch torque

Post by Stuka »

Per the york manual, it should be 20-25ft lbs (see page 9 in PDF below).

http://www.billavista.com/tech/pdf_inde ... Manual.pdf
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

sonoraed
Vendor
Posts: 673
Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:

Re: Clutch torque

Post by sonoraed »

Stuka wrote: Thu Sep 29, 2022 6:49 am Per the york manual, it should be 20-25ft lbs (see page 9 in PDF below).

http://www.billavista.com/tech/pdf_inde ... Manual.pdf
billavista is a amazing website, wish I had that kind of time! Thanks Stuka
User avatar

Yeller
Posts: 1487
Joined: Thu Apr 01, 2021 7:54 am
Location: Rogers County Oklahoma

Re: Clutch torque

Post by Yeller »

sonoraed wrote: Thu Sep 29, 2022 7:57 am
Stuka wrote: Thu Sep 29, 2022 6:49 am Per the york manual, it should be 20-25ft lbs (see page 9 in PDF below).

http://www.billavista.com/tech/pdf_inde ... Manual.pdf
billavista is a amazing website, wish I had that kind of time! Thanks Stuka
He's not bad for a Canadian :P Actually got to meet him once, he's a great dude and we'd have a bunch of tech data lost if it wasn't for his efforts :D
The bus I ride is so short it is a yellow Smart Car full of squirrels, monkeys and clowns.

1970 J2500 Resto Mod
https://www.fsjnetwork.com/forum/viewt ... 12&t=21395

1974 Bronco “Broncno”
https://classicbroncos.com/forums/threa ... st-3411909
User avatar

Stuka
Site Admin
Posts: 11772
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: Clutch torque

Post by Stuka »

Yeah, that site is a huge resource. Lots of good articles and tech resources.
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

Topic author
Horsman
Posts: 62
Joined: Thu Nov 25, 2021 7:36 pm
Location: North Texas

Re: Clutch torque

Post by Horsman »

Stuka wrote: Thu Sep 29, 2022 6:49 am Per the york manual, it should be 20-25ft lbs (see page 9 in PDF below).

http://www.billavista.com/tech/pdf_inde ... Manual.pdf
Thanks so much.
Jeff Horsman
1979 Jeep Wagoneer
1967 Pontiac 2+2
Post Reply