Note they use the York compressor which because the mounting holes are the same on all sides can be mounted vertically or horizontal.
A adapter plate is available to convert to a Sanden style 508 compressor
Sent from my iPhone using Tapatalk
Aftermarket compressor mount instructions
-
sonoraed
Topic author - Vendor
- Posts: 629
- Joined: Sun Apr 07, 2013 7:38 am
- Location: Sonora,Ca
- Contact:
Aftermarket compressor mount instructions
I ran across these the other day, not factory but aftermarket add on mount kits
Note they use the York compressor which because the mounting holes are the same on all sides can be mounted vertically or horizontal.
A adapter plate is available to convert to a Sanden style 508 compressor
Sent from my iPhone using Tapatalk
Note they use the York compressor which because the mounting holes are the same on all sides can be mounted vertically or horizontal.
A adapter plate is available to convert to a Sanden style 508 compressor
Sent from my iPhone using Tapatalk
-
devildog80
- Posts: 596
- Joined: Wed Apr 13, 2022 2:41 pm
- Location: Apache Junction AZ
Re: Aftermarket compressor mount instructions
Looks like what I have on my '84 Grand Wagoneer.
Nice to have for reference
Thanks for posting
Nice to have for reference
Thanks for posting
'81 CJ5 Base, 258 I6, MC2100, T176 4 spd, 300 TC, D30 Front NT, 3.31, 2-Piece AMC 20 rear NT, 3.31, 4" high arc spring lift
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified
'84 Grand Wagoneer, 401 V8 (.030 over), MC2150 HA Comp, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT 3.31, 4" high arc spring lift
Rather be driving, than waiting to be modified