Vintage Air Modified under dash vents

Area for stock and aftermarket air conditioning.
Post Reply

Topic author
RamJetFSJ
Posts: 431
Joined: Fri Mar 22, 2013 12:36 pm
Location: Carpinteria, CA

Vintage Air Modified under dash vents

Post by RamJetFSJ »

sonoraed asked me to post this over here on the AC forum. This is my semi custom under dash vent setup. I used the #492000-VUA and split it between the center vents and extended it for room for the controls. I think it looks pretty stock and is now the perfect width.
IMG_0592.jpeg
I used some extra ABS I had laying around, and some ABS glue from the hardware store. Filled the voids with bondo and sanded/painted it with a texture paint to try and cover up any obvious signs of modification.

Vintage Air Magnum IV Install on a 80 Wag
You do not have the required permissions to view the files attached to this post.
80 Wag in 73 attire, Ram Jet 350 power

sonoraed
Vendor
Posts: 673
Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:

Re: Vintage Air Modified under dash vents

Post by sonoraed »

Thanks for reposting, to me that really looks clean and balanced and reflects the look of the original American Air evaporators also solves the problem of where to put the controls, Well done

michaelbennett902
Posts: 7
Joined: Thu Jan 28, 2021 12:15 am

Re: Vintage Air Modified under dash vents

Post by michaelbennett902 »

Thanks for sharing.
Post Reply