Sanden compressor bracket adapter?

Area for stock and aftermarket air conditioning.
Post Reply

Topic author
Johnzi10
Posts: 256
Joined: Wed Nov 25, 2020 9:43 pm
Location: Northern Kentucky

Sanden compressor bracket adapter?

Post by Johnzi10 »

I want to address my AC compressor bracket on my 89 Grand Wagoneer. Mine has a crack on a bolt hole. A new member has a York bracket and sent me this link

https://www.jegs.com/i/Vintage-Air/960/ ... B/10002/-1

I have an inoperative Sanden on my 89., so if I need a new compressor, I want to fix the bracket situation. Will I need different belts with the original York bracket using the vintage air adapter? Any suggestions ( junk yard) or websites to find a direct replacement?Image

You can see where the bracket is cracked. Can it be repaired? Any input is appreciated, thanks.


Sent from my iPhone using Tapatalk
2020 Cherokee Limited v6. Wife’s Jeep
2002 Grand Cherokee Laredo Daughters Jeep
1998 XJ Cherokee “the Ghost”
1989 Grand Wagoneer my Covid mental health medicine

sonoraed
Vendor
Posts: 673
Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:

Re: Sanden compressor bracket adapter?

Post by sonoraed »

Hard to tell from the picture if all the pieces are there,if so welding aluminum is common these days.the vintage air plate is just an adaptor to go from the old style York compressor to a sanden I don’t see how that will do you any good


Sent from my iPad using Tapatalk

Topic author
Johnzi10
Posts: 256
Joined: Wed Nov 25, 2020 9:43 pm
Location: Northern Kentucky

Re: Sanden compressor bracket adapter?

Post by Johnzi10 »

I can get a York compressor bracket and was going to use the adapter for my Sanden, if I cannot find a Sanden bracket. I will investigate repairing mine.
2020 Cherokee Limited v6. Wife’s Jeep
2002 Grand Cherokee Laredo Daughters Jeep
1998 XJ Cherokee “the Ghost”
1989 Grand Wagoneer my Covid mental health medicine

runuover86gw
Posts: 208
Joined: Fri Feb 07, 2020 6:04 am
Location: Newport News, VA
Contact:

Re: Sanden compressor bracket adapter?

Post by runuover86gw »

Johnzi10 wrote: Tue Aug 31, 2021 11:31 am I can get a York compressor bracket and was going to use the adapter for my Sanden, if I cannot find a Sanden bracket. I will investigate repairing mine.
I may be able to find you a factory Sanden bracket. I am going to pick up some parts in the middle of next week if you aren't in too big of a hurry. It's about a two and a half hour drive for me, but I am willing to to just charge you the cost it is for me plus shipping, because I am already going there and picking up parts for some customers anyways. And I can even bead blast it for you for no charge if you want since that doesn't take much for me to do that on a piece that small. That way I can verify there aren't any stress cracks starting to form before I send it to you. Just message me if this sounds like something you are interested in. Thank you.

Josh
Josh's Classic Custom Auto Electronics LLC, Owner/Founder
https://www.facebook.com/JoshsFSJRelayKits
1986 GW 360/NP229/TF727/Dana 44's
1986 Comanche
1979 Wagoneer Limited 360/Quadra-Trac/Turbo 400/Dana 44's

Topic author
Johnzi10
Posts: 256
Joined: Wed Nov 25, 2020 9:43 pm
Location: Northern Kentucky

Re: Sanden compressor bracket adapter?

Post by Johnzi10 »

Sounds great Josh! Pm me when you have it!
2020 Cherokee Limited v6. Wife’s Jeep
2002 Grand Cherokee Laredo Daughters Jeep
1998 XJ Cherokee “the Ghost”
1989 Grand Wagoneer my Covid mental health medicine

runuover86gw
Posts: 208
Joined: Fri Feb 07, 2020 6:04 am
Location: Newport News, VA
Contact:

Re: Sanden compressor bracket adapter?

Post by runuover86gw »

Johnzi10 wrote: Wed Sep 01, 2021 6:07 am Sounds great Josh! Pm me when you have it!
Will do. And just to be clear, you are talking about the big bracket that the AC compressor mounts to, right? It has the two bolts that mount to the compressor and the other bolts and a stud that mount to the engine? Just want to make sure, because that is the more expensive of most brackets when it comes to mounting the Sanden compressor. I want to say I have asked him before, but it should be under $100 or right at that from what I recall.
Josh's Classic Custom Auto Electronics LLC, Owner/Founder
https://www.facebook.com/JoshsFSJRelayKits
1986 GW 360/NP229/TF727/Dana 44's
1986 Comanche
1979 Wagoneer Limited 360/Quadra-Trac/Turbo 400/Dana 44's

troopthrowback
Posts: 58
Joined: Sat Feb 20, 2016 11:57 pm

Re: Sanden compressor bracket adapter?

Post by troopthrowback »

Have you checked jeepair.com? If they don’t have it on their website send them an email.

I’m not affiliated but have conversion parts in the way for my wife’s 87 Grand Wagoneer from York to sanden and r134a.

sonoraed
Vendor
Posts: 673
Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:

Re: Sanden compressor bracket adapter?

Post by sonoraed »

CVF makes a serpentine kit for AMC/Jeep 304/360/401 runs about $2000.00 includes everything compressor/PSpump/alt/pulleys/ bracket. slick way to go

Topic author
Johnzi10
Posts: 256
Joined: Wed Nov 25, 2020 9:43 pm
Location: Northern Kentucky

Re: Sanden compressor bracket adapter?

Post by Johnzi10 »

I didn’t see it on the website!
2020 Cherokee Limited v6. Wife’s Jeep
2002 Grand Cherokee Laredo Daughters Jeep
1998 XJ Cherokee “the Ghost”
1989 Grand Wagoneer my Covid mental health medicine

sonoraed
Vendor
Posts: 673
Joined: Sun Apr 07, 2013 7:38 am
Location: Sonora,Ca
Contact:

Re: Sanden compressor bracket adapter?

Post by sonoraed »


Topic author
Johnzi10
Posts: 256
Joined: Wed Nov 25, 2020 9:43 pm
Location: Northern Kentucky

Re: Sanden compressor bracket adapter?

Post by Johnzi10 »

Thanks! So many choices!
2020 Cherokee Limited v6. Wife’s Jeep
2002 Grand Cherokee Laredo Daughters Jeep
1998 XJ Cherokee “the Ghost”
1989 Grand Wagoneer my Covid mental health medicine
Post Reply