Not blowing cold enough

Area for stock and aftermarket air conditioning.
Post Reply

Topic author
Posts: 41
Joined: Sun Jan 05, 2020 6:32 pm

Not blowing cold enough

Post by ZacharyH » Wed Jul 15, 2020 5:51 pm

I am using enviro-safe which is apparently compatible with R-12 systems, I charged it last summer after i fixed the leak and the vent temp was never cool enough. Everything is original, i just replaced a hose that was leaking. When the AC is on the compressor is on 100% of the time and the temperature dial does nothing(probably because it blows too warm).
60% humidity
210 high side
35 low side
63F vent

According to the TSM of my jeep low side should be(in R12) 25PSI and the highside 259PSI
According th envirosafe the low side pressure should be exactly the same as the R12 pressure and the high side ccould be up to 15 PSI lower. That tells me that the low side is high and the high side is low which could mean expansion valve or maybe worn compressor?
What do you guys think could be the issue?

Posts: 1539
Joined: Tue May 21, 2013 12:02 pm
Location: Lompoc, Sunland or somewhere between

Re: Not blowing cold enough

Post by SJTD » Wed Jul 15, 2020 9:13 pm

Idunno. Are you seeing bubbles is the sight glass?

Did you suck the system down before charging, replace the drier?
Sic friatur crustulum

'84 GW with Nissan SD33T, early Chev NV4500, 300, narrowed Ford reverse 44, narrowed Ford 60, SOA/reversed shackle in fornt, lowered mount/flipped shackle in rear.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest