ECI 2015 June 18-21

For all discussions related to the annual East Coast Invasion
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

ECI 2015 June 18-21

Post by lobie » Mon Jan 12, 2015 2:23 pm

ECI 2015 June 18-21

Camping is free at Badin Lake Group Camp
GPS Coordinates: 35.451127, -80.071579

Image

East Coast Invasion 2015 Itinerary

*** The following times are a general estimate, and may be changed at any time, for any reason. Please remember to Tread Lightly. Any questions, concerns, or issues that need to be addressed should be directed to a CFSJC Member.***

Thursday 6/18
Set up camp
Trails TBD

Friday 6/19
9:00am - Easy: Falls Dam, Difficult: Rocky Mountain Loop
2:00pm - Easy: Slab Pile, Difficult: Daniel
7:00pm - Easy: Wolf Den, Difficult: Dutch John
11:00pm - Easy: Saw Mill, Difficult: Dickey Bell

Saturday 6/20
8:00am - Group Breakfast hosted by the CFSJC
9:00am - Easy: Rider’s Choice, Difficult: Daniel
12:30pm - All: Dickey Bell
5:30pm - Group Picture
6:00pm - Raffle
7:00pm - Easy: Saw Mill, Difficult: Rocky Mountain Loop
11:00pm - Rider’s Choice

Sunday 6/21
Dickey Bell trail clean up after breakfast

*** Please form 2 lines in the big field approximately 15 minutes prior to posted ride times. Left line for the Easy trail group; Right line for the Difficult trail group. Trail leaders and CB channels will be determined before each group leaves from camp. Have fun and remember to Tread Lightly!!!***
Last edited by lobie on Fri Mar 06, 2015 7:53 am, edited 2 times in total.
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com

User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: ECI 2015 June 18-21

Post by lobie » Mon Jan 12, 2015 2:25 pm

reserved for future
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com

User avatar

Tad
Vendor
Posts: 2239
Joined: Fri May 13, 2011 4:08 am
Location: Southern AZ
Contact:

Re: ECI 2015 June 18-21

Post by Tad » Sun Jan 25, 2015 6:27 am

Made this a sticky for you folks.
A collection of 1966 to 1986 parts.
Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/37" Trxus MT's
(Join date = Friday the 13th)

My Stuff:
http://www.ttsfabworks.com/
Tech Stuff:
IFSJA WMS Project
TadRack Files-Open Source

User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: ECI 2015 June 18-21

Post by lobie » Tue Apr 28, 2015 6:08 pm

About 2 months to go. Who's in?
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com


surfwagoneer
Posts: 579
Joined: Fri Oct 05, 2012 6:09 am
Location: Wilmington, NC

Re: ECI 2015 June 18-21

Post by surfwagoneer » Wed Apr 29, 2015 4:38 pm

I'll be there with the whole fam
89 GW- Rebuilt 360 w RV camshaft, 4 inch Rustys spring lift, 1" body lift, dana 44HD front, 14 bolt rear 3.73's.
78 Cherokee Chief- work in progress

User avatar

MtnYJ
Posts: 147
Joined: Sun Jun 10, 2012 8:12 pm
Location: Asheville, NC

Re: ECI 2015 June 18-21

Post by MtnYJ » Fri May 08, 2015 10:13 am

We'll be there!
Looking forward to seeing everyone again.
Tim & Sarah

'84 CJ-7, AMC 401
'76 J20, T-18, Dana 20, no floors
'91 Grand Wagoneer, AMC 360, AX-15, NP208, manual hubs
'93 YJ, 4.0L, 5-SP, flipped Dana 300, Dana 44s
'14 Ram 3500 4x4 CTD
Carolina Full Size Jeep Club President http://www.cfsjc.com


racerx12003r1
Posts: 403
Joined: Sun Dec 29, 2013 8:12 am
Location: China Grove NC

Re: ECI 2015 June 18-21

Post by racerx12003r1 » Sun May 10, 2015 8:34 am

I plan to be there. Been working on the Grease slapper like crazy trying to get her ready to roll.
Daniel

1980 J10 Thunderbolt Grease slapper (formerly Beast II)


surfwagoneer
Posts: 579
Joined: Fri Oct 05, 2012 6:09 am
Location: Wilmington, NC

Re: ECI 2015 June 18-21

Post by surfwagoneer » Tue May 12, 2015 6:49 pm

The time is coming up Quick! Any last minute projects you guys are knocking out....I have way to many on my list again....We'll see how much actually gets done
89 GW- Rebuilt 360 w RV camshaft, 4 inch Rustys spring lift, 1" body lift, dana 44HD front, 14 bolt rear 3.73's.
78 Cherokee Chief- work in progress


racerx12003r1
Posts: 403
Joined: Sun Dec 29, 2013 8:12 am
Location: China Grove NC

Re: ECI 2015 June 18-21

Post by racerx12003r1 » Fri May 15, 2015 7:56 am

I still have the front clip off mine. working on a hydraulic clutch system, then on to making my headers. Tick tock tick tock.
Daniel

1980 J10 Thunderbolt Grease slapper (formerly Beast II)

User avatar

bwwhaler
Posts: 224
Joined: Thu Oct 04, 2012 6:33 am
Location: Wilmington NC

Re: ECI 2015 June 18-21

Post by bwwhaler » Tue May 26, 2015 5:19 pm

Less than 30 days... Almost time.
1987 GW 360/727/229 Performer intake Holley 670 32's 4" BJ's Springs CS-144 Serehill's light and tailgate harness

User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: ECI 2015 June 18-21

Post by lobie » Tue May 26, 2015 5:22 pm

surfwagoneer wrote:The time is coming up Quick! Any last minute projects you guys are knocking out....I have way to many on my list again....We'll see how much actually gets done
Join the crowd. Too much on my list. We'll see.....
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com

User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: ECI 2015 June 18-21

Post by lobie » Thu Jun 04, 2015 11:03 am

2 wks
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com


surfwagoneer
Posts: 579
Joined: Fri Oct 05, 2012 6:09 am
Location: Wilmington, NC

Re: ECI 2015 June 18-21

Post by surfwagoneer » Thu Jun 04, 2015 7:34 pm

Game on
89 GW- Rebuilt 360 w RV camshaft, 4 inch Rustys spring lift, 1" body lift, dana 44HD front, 14 bolt rear 3.73's.
78 Cherokee Chief- work in progress

User avatar

MtnYJ
Posts: 147
Joined: Sun Jun 10, 2012 8:12 pm
Location: Asheville, NC

Re: ECI 2015 June 18-21

Post by MtnYJ » Mon Jun 08, 2015 1:11 pm

10 days!!
Tim & Sarah

'84 CJ-7, AMC 401
'76 J20, T-18, Dana 20, no floors
'91 Grand Wagoneer, AMC 360, AX-15, NP208, manual hubs
'93 YJ, 4.0L, 5-SP, flipped Dana 300, Dana 44s
'14 Ram 3500 4x4 CTD
Carolina Full Size Jeep Club President http://www.cfsjc.com

User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: ECI 2015 June 18-21

Post by lobie » Thu Jun 11, 2015 5:19 am

1 wk
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com

User avatar

Tad
Vendor
Posts: 2239
Joined: Fri May 13, 2011 4:08 am
Location: Southern AZ
Contact:

Re: ECI 2015 June 18-21

Post by Tad » Thu Jun 11, 2015 8:16 am

Rolling out Saturday am, 2,000 miles each way.

Image

Image
A collection of 1966 to 1986 parts.
Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/37" Trxus MT's
(Join date = Friday the 13th)

My Stuff:
http://www.ttsfabworks.com/
Tech Stuff:
IFSJA WMS Project
TadRack Files-Open Source

User avatar

Gumby
Posts: 1426
Joined: Sun Jan 29, 2012 10:20 am
Location: Tucson, AZ

Re: ECI 2015 June 18-21

Post by Gumby » Thu Jun 11, 2015 8:29 am

Safe travels Tad, see you in the mountains.
1984 GW 360/727/208.... 4"/ 31"
2004 CRD QC SRW 3500 4X4 (DD)
1983 "project Dubya" (long term)

User avatar

rstep
Moderator
Posts: 1195
Joined: Sun Dec 18, 2011 5:52 am
Location: Tucson,Desert
Contact:

Re: ECI 2015 June 18-21

Post by rstep » Thu Jun 11, 2015 3:14 pm

Safe ride Tad.
1977 Cherokee Sold
I Don't own One
Stuff I Make.
http://fsjnetwork.com/forum/viewtopic.php?f=34&t=5620

User avatar

Tad
Vendor
Posts: 2239
Joined: Fri May 13, 2011 4:08 am
Location: Southern AZ
Contact:

Re: ECI 2015 June 18-21

Post by Tad » Thu Jun 11, 2015 3:47 pm

Gumby wrote:Safe travels Tad, see you in the mountains.
rstep wrote:Safe ride Tad.
Thanks guys, AZ will hopefully represent well on the east coast for the first time.
A collection of 1966 to 1986 parts.
Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/37" Trxus MT's
(Join date = Friday the 13th)

My Stuff:
http://www.ttsfabworks.com/
Tech Stuff:
IFSJA WMS Project
TadRack Files-Open Source


surfwagoneer
Posts: 579
Joined: Fri Oct 05, 2012 6:09 am
Location: Wilmington, NC

Re: ECI 2015 June 18-21

Post by surfwagoneer » Thu Jun 11, 2015 6:36 pm

safe travels!
89 GW- Rebuilt 360 w RV camshaft, 4 inch Rustys spring lift, 1" body lift, dana 44HD front, 14 bolt rear 3.73's.
78 Cherokee Chief- work in progress

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest