Full Size Jeep Network

ECI is in a national forest and sales are prohibited on the property. There are places outside the forest to conduct your business.
Please do not turn your campsite into a "yard sale" with parts laying out.

With that said.....

Since we are FSJers and always looking for parts. Post up if you have parts to barter.

I have a number of parts left from my builds.

- TH400 case. AMC bolt pattern.

- Stock rear springs from my 79 chief with full length add-a-leaf. The add-a-leaf is fairly new and used for about 2 months on the jeep.

- Rear dana 44 off my 77 Waggy. Offset diff. 6 lug. Has locker. Not sure what kind.

- Front dana 44 off my 77 Waggy. Passenger drop.

I have a late model tilt steering column complete with steering wheel I can bring if anybody wants it.

Looking for an '88 windshield wiper motor.

I have a set of stock rectangular fog lights and brackets, stock front bumper and final edition grill from an '89 waggy. I could also be persuaded to sell the stock rear bumper, will be replaced eventually anyways.

Also need Driver Front window motor for '88, and a 36" tire for a spare.

Here's our list... All prices are of course OBO. If you want me to bring something to ECI, I need to know by Wednesday evening.

Full Size Jeep Parts
Dana 44 knuckles from a 1989 Grand Wagoneer, NOT flat top $30/pr
Stock Waggy Dana 44 R&P 2.72:1 $10
Waggy steering box, no pitman arm, and will need a rebuild $25
NP-229 vacuum shift motor $20
NP-229 vacuum shifter switch $15
'91 Waggy alternator $20
Cheap seat covers from '91 Waggy $10
Rhino grill set, in poor condition $35
AMC 360 plug wire set – lightly used $10
Stock headlights with bezels $10
Mechanical fan/clutch $15
Stock '91 Waggy rear bumper in good shape $45
Stock '91 Waggy front bumper rubber baby buggy bumpers $10
MC-2150 NAPA Carb rebuild kit – new $50
Drive slugs for FSJ Dana 44, with chrome caps $10
MC-2150 Carb idle solenoid $10
'91 Waggy tonneau cover plastic mounting hardware $5
5 Wheel centers $40
Grand Wagonner badges, V8 badge, and 4X4 badges $10
Stock trailer hitch, needs a good cleaning/paint $40
'89 Waggy hood ornament $10
TF-727 aluminum mid plate $10

1989 XJ Parts
Scissor jack $5

CJ-7 parts, from an '84 with the 4 cyl
Full carpet kit – red $40
Radiator – new, installed but never ran $50
Alternator $30
Power steering pump $15
Exhaust manifold $15
“Crossmember” - the solid round bar that connects the two frame side engine mounts $10
New Rugged Ridge rear spring hangers $15
Motor mounts for 4.2 engine, both block brackets and passenger's frame bracket $40
Stock front spring shackles $10
Stock steering gear mount, in good shape $20

1993 YJ
Stock rear driveshaft(s) 2 $20/ea
AX-15 aluminum mid-plate $10
Dana 30 hubs, in good shape $40/pair
Tail lights, in fair shape $15

Other random parts laying around...
0-60 PSI Isspro boost gauge, used a couple of months, looks brand new $25
Small drill press vice $10
2001 Dodge Cummins stock air box $25
2001 Dodge 2500 Class IV hitch, just needs a bath $100
6" drop trailer ball mount, max trailer 12K pounds, 2" ball - $80 obo
8" drop trailer ball mount, max trailer 12K pounds, 2"ball - never towed with this one, only hooked trailer to it once - $90 obo
Sony Vega TV, 27" $75
Exercise bike $20

Not really a "For Sale", but I will trade for good advice and maybe a cold beverage.

I have 2 30x9.5r15 Goodyear Wrangler MT/R's that still have decent tread on them. I just had new shoes put on the J10 last night and had them toss these 2 into the bed since they were in decent shape. The other 2 were bald and quickly approaching dangerous.

I am pretty sure these are the pre-kevlar version but not sure.

If anyone wants/needs them, I will bring to ECI or let me know if want to make other arrangements to come get them in Fayetteville, NC.

Thought I would offer before letting them go.

T 177 out of a 83 J-10 - needs new output shaft, has the bronze shift forks.
Shifts smooth through the gears- Make offer

Jim