2014 - parts sales, swaps, barters

For all discussions related to the annual East Coast Invasion
Post Reply
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

2014 - parts sales, swaps, barters

Post by lobie »

ECI is in a national forest and sales are prohibited on the property. There are places outside the forest to conduct your business.
Please do not turn your campsite into a "yard sale" with parts laying out.


With that said.....

Since we are FSJers and always looking for parts. Post up if you have parts to barter.
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 2014 - parts sales, swaps, barters

Post by lobie »

I have a number of parts left from my builds.

- TH400 case. AMC bolt pattern.

- Stock rear springs from my 79 chief with full length add-a-leaf. The add-a-leaf is fairly new and used for about 2 months on the jeep.

- Rear dana 44 off my 77 Waggy. Offset diff. 6 lug. Has locker. Not sure what kind.

- Front dana 44 off my 77 Waggy. Passenger drop.
Last edited by lobie on Wed May 28, 2014 4:42 pm, edited 2 times in total.
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

bwwhaler
Posts: 224
Joined: Thu Oct 04, 2012 6:33 am
Location: Wilmington NC

Re: 2014 - parts sales, swaps, barters

Post by bwwhaler »

I have a late model tilt steering column complete with steering wheel I can bring if anybody wants it.
1987 GW 360/727/229 Performer intake Holley 670 32's 4" BJ's Springs CS-144 Serehill's light and tailgate harness

dank00
Posts: 6
Joined: Wed Jun 20, 2012 5:25 am

Re: 2014 - parts sales, swaps, barters

Post by dank00 »

Looking for an '88 windshield wiper motor.

surfwagoneer
Posts: 579
Joined: Fri Oct 05, 2012 6:09 am
Location: Wilmington, NC

Re: 2014 - parts sales, swaps, barters

Post by surfwagoneer »

I have a set of stock rectangular fog lights and brackets, stock front bumper and final edition grill from an '89 waggy. I could also be persuaded to sell the stock rear bumper, will be replaced eventually anyways.
Last edited by surfwagoneer on Sat May 24, 2014 5:45 pm, edited 1 time in total.
89 GW- Rebuilt 360 w RV camshaft, 4 inch Rustys spring lift, 1" body lift, dana 44HD front, 14 bolt rear 3.73's.
78 Cherokee Chief- work in progress

dank00
Posts: 6
Joined: Wed Jun 20, 2012 5:25 am

Re: 2014 - parts sales, swaps, barters

Post by dank00 »

Also need Driver Front window motor for '88, and a 36" tire for a spare.
User avatar

MtnYJ
Posts: 147
Joined: Sun Jun 10, 2012 8:12 pm
Location: Asheville, NC

Re: 2014 - parts sales, swaps, barters

Post by MtnYJ »

Here's our list... All prices are of course OBO. If you want me to bring something to ECI, I need to know by Wednesday evening.

Full Size Jeep Parts
Dana 44 knuckles from a 1989 Grand Wagoneer, NOT flat top $30/pr
Stock Waggy Dana 44 R&P 2.72:1 $10
Waggy steering box, no pitman arm, and will need a rebuild $25
NP-229 vacuum shift motor $20
NP-229 vacuum shifter switch $15
'91 Waggy alternator $20
Cheap seat covers from '91 Waggy $10
Rhino grill set, in poor condition $35
AMC 360 plug wire set – lightly used $10
Stock headlights with bezels $10
Mechanical fan/clutch $15
Stock '91 Waggy rear bumper in good shape $45
Stock '91 Waggy front bumper rubber baby buggy bumpers $10
MC-2150 NAPA Carb rebuild kit – new $50
Drive slugs for FSJ Dana 44, with chrome caps $10
MC-2150 Carb idle solenoid $10
'91 Waggy tonneau cover plastic mounting hardware $5
5 Wheel centers $40
Grand Wagonner badges, V8 badge, and 4X4 badges $10
Stock trailer hitch, needs a good cleaning/paint $40
'89 Waggy hood ornament $10
TF-727 aluminum mid plate $10

1989 XJ Parts
Scissor jack $5

CJ-7 parts, from an '84 with the 4 cyl
Full carpet kit – red $40
Radiator – new, installed but never ran $50
Alternator $30
Power steering pump $15
Exhaust manifold $15
“Crossmember” - the solid round bar that connects the two frame side engine mounts $10
New Rugged Ridge rear spring hangers $15
Motor mounts for 4.2 engine, both block brackets and passenger's frame bracket $40
Stock front spring shackles $10
Stock steering gear mount, in good shape $20

1993 YJ
Stock rear driveshaft(s) 2 $20/ea
AX-15 aluminum mid-plate $10
Dana 30 hubs, in good shape $40/pair
Tail lights, in fair shape $15

Other random parts laying around...
0-60 PSI Isspro boost gauge, used a couple of months, looks brand new $25
Small drill press vice $10
2001 Dodge Cummins stock air box $25
2001 Dodge 2500 Class IV hitch, just needs a bath $100
6" drop trailer ball mount, max trailer 12K pounds, 2" ball - $80 obo
8" drop trailer ball mount, max trailer 12K pounds, 2"ball - never towed with this one, only hooked trailer to it once - $90 obo
Sony Vega TV, 27" $75
Exercise bike $20
Tim & Sarah

'84 CJ-7, AMC 401
'76 J20, T-18, Dana 20, no floors
'91 Grand Wagoneer, AMC 360, AX-15, NP208, manual hubs
'93 YJ, 4.0L, 5-SP, flipped Dana 300, Dana 44s
'14 Ram 3500 4x4 CTD
Carolina Full Size Jeep Club President http://www.cfsjc.com
User avatar

jpswapmohn
Posts: 656
Joined: Sun Mar 02, 2014 6:08 pm
Location: CO

2 30" MT/R tires with decent tread.. FREE

Post by jpswapmohn »

Not really a "For Sale", but I will trade for good advice and maybe a cold beverage.

I have 2 30x9.5r15 Goodyear Wrangler MT/R's that still have decent tread on them. I just had new shoes put on the J10 last night and had them toss these 2 into the bed since they were in decent shape. The other 2 were bald and quickly approaching dangerous.

I am pretty sure these are the pre-kevlar version but not sure.

If anyone wants/needs them, I will bring to ECI or let me know if want to make other arrangements to come get them in Fayetteville, NC.

Thought I would offer before letting them go.
One day I will wake up and realize that my jeep is complete...one day, I just know it.
88Wag, LT1/4L60E/NP242, J20 axles, etc. http://imgbox.com/g/rNuIasKYrS
95YJ, STaK, D44's, SOA, ARB's, Bilstein 5150s, 35" KM2's
50 CJ3A
77 J-10 (sold)

War Wagon
Posts: 81
Joined: Sat Jun 09, 2012 6:47 pm
Location: China Grove, NC

Re: 2014 - parts sales, swaps, barters

Post by War Wagon »

T 177 out of a 83 J-10 - needs new output shaft, has the bronze shift forks.
Shifts smooth through the gears- Make offer

Jim
The War Wagon - 78 Wagoneer, 6" BJ's no flex lift, 33's, 360/T400/QT, Aussie Locker
The War Truck - 79 J20 Flatbed
1979 J-10 360/t-18/D20
The War Buggy - 81 J10 Truggy
The Compost Heep - 82 Wagoneer Camo
The Warlock - 83 J10 Sport Side 360/T18/208
07 JK Rubicon - Wife's DD
09 JK Rubicon Unlimited Daugther's DD

04 F-350 CC SRW FX4 6.0 My DD and tow vehicle
Post Reply