79 Cherokee Chief Cummins 6bt with ford one ton axles

For everything related to converting and up keeping diesel engines in an FSJ
User avatar

jaber
Vendor
Posts: 3066
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by jaber »

You are moving along nicely, nice work.
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

Finished the exhaust.

Image

Image

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

Also got the fuel lines plumbed and the fuel sensor wired.

Image

Image

Image

Image

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

Had plans to wire the fan and temp sender today. I over tightened the sender sensor and sheared it off. I was frustrated so I called it a day. Going to go help a friend do his front knucles.

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

In the last week I've got a little bit done.

Gauges
Stated plumbing the ps and hydro boost.
Secure battery.
Tach sender.

Image

Image

Image

Image

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

I have not updated this thread in a while. Mostly cause I have my website that I document everything in. It is on IFSJA too but that site is a POS lately. It keeps crashing. You can check out the full build with pics: http://lobie4x4.com/the-jeep/
I have rebuilt the tranny last week. It's been going good. We pulled our 30 ft camper to URE this week and will stay through ECU wknd. Its about 150 miles with no major issues. I do need a new steering box.
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Resbum
Posts: 466
Joined: Fri Jun 08, 2012 9:45 am
Location: North East Oregon

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by Resbum »

Cool beans. Glad you made your goal of attending ECU. :ymapplause: I officially backed out of attending Ouray last week. Oh well, there's next year.

Freakin' IFSJA I'm still trying to figure out how to get in so I can move my build thread over here. I didn't realize there were issues with management over there until I started reading the posts in here.

Resbum
Originally Posted by Resbum
"What year is my truck?... Which part?" Build thread- http://www.fsjnetwork.com/forum/viewtop ... 290#p18290
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

Resbum wrote:Cool beans. Glad you made your goal of attending ECU. :ymapplause: I officially backed out of attending Ouray last week. Oh well, there's next year.

Freakin' IFSJA I'm still trying to figure out how to get in so I can move my build thread over here. I didn't realize there were issues with management over there until I started reading the posts in here.

Resbum
Yeah, not sure what's up with IFSJA. That's why I originally put my build over here. Then decided I wanted my own web page.
It seems Stuka has his stuff together here. There's just a decade of good info on IFSJA. It's ashame the owner won't hand it off to someone.
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Jwalton23
Posts: 6
Joined: Wed Apr 18, 2012 11:23 am
Location: Tennessee

78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by Jwalton23 »

Glad you carried over I was watching your build with envy and jealousy. :) I saw the video of you snapping parts off road. It looked like it preformed well. How did the suspension flex?
1991 Jeep Grand Wagoneer
6" lift from Rusty's
35" maxxis
Edelbrock carb and intake
.030 over with rv cam
Rhino conversion
Bj's pre-runner bumper
More to come!
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

Jwalton23 wrote:Glad you carried over I was watching your build with envy and jealousy. :) I saw the video of you snapping parts off road. It looked like it preformed well. How did the suspension flex?
Suspension is not bad. The rear has the original leafs. I had to add an add-a-leaf to pull the camper. We road a couple trails yesterday and it was doing good. I've been easy on it cause I need to get the camper home. I try not to do hard stuff. Just makes the back and wallet hurt :-q
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

FORM IFSJA
3/7/12

Did some work this evening.
UPS came so I got lots of parts. Should keep me busy for a while.
Installed the oil pressure sensor and wired it. Put a new thermostat in.

Made the battery tray.

Image

Image

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

3/7/12

Have all the gauges now. Started mocking up the instrument cluster.

Image

Image

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

3/8/12

Have a 3 day wknd coming up so I've been thinking about what I'm gonna get done. One of the items is to wire the rad. fan up.

There are 2 switches that control when the fan comes on and goes off:

1) coolant temp
2) A/C

I also want the ability to manually override the fan to come on or to stay off (crossing water or something).

This is what I have come up with.

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

3/8/12

Worked on the wiring posted above. Should have it done tomorrow. Also painted the cluster. Should have that done tomorrow too. Then I'll plumb the ps and hydro.

Picked up some turn signal indicators and some other stuff to finish the wiring. Dash should turn out good.

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

3/9/12

Paint was pretty much dry this morning. I put the gauges in. Turned out pretty good.

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

3/9/12

Got 2 things checked off the list today. Secure the battery and wire the fan.

Started plumbing the ps and hydr boost. I ordered some reusable fittings and hose so I could make them myself. I thought the gear box pressure port was 3/8" inverted flare but it is actually 7/16". I couldn't finish it today. They don't have a 7/16" fitting and can't find one. Going to have to use the original ans add I splice fitting.

Also worked on wiring the dash.

Hose / fittings and the first hose I made.

Image

Image

Image

Image

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

3/9/12

Wiring

Image

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

3/10/12

Finished the gauges this morning and installed it in the jeep. I had some red LEDs from a previous project so I swapped the bulbs out for the LEDs.

Image

Image

Image

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

3/10/12

Also installed the tach sender. It reads off the damper with two magnets adjacent to each other. Similar to a reluctor ring in modern vehicles for speed sensors.

Image

Image

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
User avatar

Topic author
lobie
Posts: 488
Joined: Wed Aug 03, 2011 7:17 pm
Location: Fountain Inn, SC

Re: 78 Cherokee Chief Cummins 6bt with ford one ton axles

Post by lobie »

3/10/12

I was asked years ago to post up some tech on how i swapped the bulbs out for LEDs but I never wrote anything up. Here it goes:

This is for VDO gauge lights but I have done basically the same thing for Auto Meter gauges. The way I have done it the bulbs can be converted back. I didn't damage any of the contacts in the assembly.

The bulb assembly:

Image

Holder without the bulb:

Image

The LED I used with a pre-installed resistor:

Image
77 Wagoneer | 6.0 | TH400 | NP205 | Sterling 10.5 | Dana 60
07 6.7 Cummins 2500 4wd

http://www.lobie4x4.com
http://www.cfsjc.com
Post Reply