Page 1 of 1
What else do I need for sniper efi
Posted: Thu Jul 11, 2019 12:20 am
by DARREN LILLY
Hi I have put together some accessories for my conversion to sniper injection. So far I have the sniper master kit but will be using a fitech cc2 surge tank ( heard bad reports on the first model but nothing on this so I'll give it a go ) got a new edelbrock manifold, manifold gaskets, metal baffle plate, adaptor plate for sniper to manifold & adjustable rotor button thing for msd distributer. So anything else I would need, I need to pre order all the parts as they are not readily available here. Thanks.
Re: What else do I need for sniper efi
Posted: Thu Jul 11, 2019 2:08 am
by KJ Ryu
Why the adapter plate? The Sniper comes in several configurations now.
Re: What else do I need for sniper efi
Posted: Thu Jul 11, 2019 2:09 am
by KJ Ryu
Re: What else do I need for sniper efi
Posted: Thu Jul 11, 2019 4:08 am
by DARREN LILLY
Said in the holley item description that spread bore sealing plate #9006 is recommended, something about 4150 flanges & square bore, really dont know what this all means or if I need it but it was only $40 so I got it just in case. When I replace the manifold will I need to remove any item that will need new gaskets etc when re-installed ? I'll get a mechanic to install it for me just want to be sure I have everything to go.
Re: What else do I need for sniper efi
Posted: Mon Jul 15, 2019 11:06 am
by 1979bettywhite
Did you go EGR or non-EGR for the manifold?
Re: What else do I need for sniper efi
Posted: Mon Jul 15, 2019 4:49 pm
by DARREN LILLY
non egr, think I will need a thermostat gasket but if thats all I can easily make one if not available here.
Re: What else do I need for sniper efi
Posted: Tue Jul 16, 2019 2:02 am
by KJ Ryu
You should be fine.