Headlight adjusters.

User avatar

Topic author
jaber
Vendor
Posts: 3011
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Headlight adjusters.

Post by jaber » Sun Aug 28, 2011 9:18 am

https://www.ebay.com/itm/1974-1978-Jeep ... SwqLRcI-DL

https://www.ebay.com/itm/114360582159?s ... 1555.l2649

I make steel replacements for the nylon adjusters for headlight buckets.
round, $25 shipped

Image

Image

square, $30 shipped

Image

Image


:fsj:

One set does both headlights on one FSJ.

I prefer Paypal, give me a shout... Image

Direct email- aberw3az@hotmail.com
Last edited by jaber on Sun Aug 16, 2020 3:07 pm, edited 24 times in total.
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/


serehill
Vendor
Posts: 1953
Joined: Sun Nov 20, 2011 4:00 pm
Location: Mesquite Texas

Re: Headlight adjusters.

Post by serehill » Mon Jun 11, 2012 5:36 pm

Just to fill in some blanks these fit a lot of vehicles including CJ's & Jeepsters & other amc models I've used them on several other models too. Forget those plastic pieces of junk these last forever. [-x
1980 Honcho 258 4 speed mostly stock with 4 " lift.

WIP

You know the rude dude from IFSJA


1980 Cherokee wrangled & mangled
MSD complete system
Eddy intake
Holley 650
Comp cam 270H
4" Rusty's
Ramsey 12K winch
208
Built to drive not sit in the garage.


No longer strangled. I didn't build it for anyone else.
If you can't improve it why waste your time?

User avatar

Topic author
jaber
Vendor
Posts: 3011
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: Headlight adjusters.

Post by jaber » Thu Mar 28, 2013 7:41 pm

Heavy_Metal_Thunder_81 on the mother ship did a write up on installing a set of square adjusters.I did a screen shot of it and saved it as a PDF file.

https://www.dropbox.com/s/frf9sli823ptv ... riteup.pdf
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/


Jcardon
Posts: 6
Joined: Thu Mar 28, 2013 10:34 am

Re: Headlight adjusters.

Post by Jcardon » Mon Apr 01, 2013 5:50 pm

I'm assuming the cost covers enough brackets to mount 2 headlights, is this the case?

User avatar

Topic author
jaber
Vendor
Posts: 3011
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: Headlight adjusters.

Post by jaber » Tue Apr 02, 2013 4:35 am

Jcardon wrote:I'm assuming the cost covers enough brackets to mount 2 headlights, is this the case?
Yes sir, enough to do 1 FSJ, both headlights. :-bd
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/


Jcardon
Posts: 6
Joined: Thu Mar 28, 2013 10:34 am

Re: Headlight adjusters.

Post by Jcardon » Thu Apr 11, 2013 12:27 pm

I received the adjusters a few day ago. They look good. Thanks for the speedy send out!

User avatar

Topic author
jaber
Vendor
Posts: 3011
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: Headlight adjusters.

Post by jaber » Fri Apr 12, 2013 4:40 am

Glad I could help another FSJ be safe... ;)
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/

User avatar

gixxerphil
Posts: 160
Joined: Sat Mar 30, 2013 7:00 am
Location: Auburn, Al

Re: Headlight adjusters.

Post by gixxerphil » Wed Apr 17, 2013 1:24 am

I would like to change the square headlights from my 79 to round ones. Would I be able to use these? I'm a complete noob to Waggy's :D
I just prefer the look of either the razor or gladiator grille

User avatar

Topic author
jaber
Vendor
Posts: 3011
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: Headlight adjusters.

Post by jaber » Wed Apr 17, 2013 6:22 am

Hey bud, glad you found us... Image

The parts I make replace the Nylon holders that the head light adjuster screws screw into. After 30 years, they start to split and break, so I came up with a permanent steel replacement.
As for changing from square to round, your best bet is to find a donor and get the entire buckets. Then send me a PM and we'll hook you up with adjusters before you install them, then you can adjust them and forget them. ;)
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/

User avatar

wewillsurvive
Posts: 1088
Joined: Mon Mar 18, 2013 1:10 pm
Location: Martinsville, IN

Re: Headlight adjusters.

Post by wewillsurvive » Fri Oct 11, 2013 4:47 am

PM sent
1972 Dodge Demon with a 451" stroker Big Block
1986 Jeep Grand Wagoneer AMC 360" AKA Golddigger- SOLD
2003 Dodge Crewcab 2500 Cummins longbed 4x4
2011 Jeep Grand Cherokee V-6 full time 4x4


Alternators, winches, 4x4, guns all have the same issue if you don't have any knowledge of them usually bad things will happen. Serehill

User avatar

Topic author
jaber
Vendor
Posts: 3011
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: Headlight adjusters.

Post by jaber » Fri Oct 11, 2013 5:58 am

Got you covered.

Thank you sir... :-bd
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/


wagoneer1982
Posts: 35
Joined: Fri Oct 18, 2013 6:05 am

Re: Headlight adjusters.

Post by wagoneer1982 » Thu Oct 31, 2013 6:43 pm

Just received mine in the mail today. Excellent quality and fast shipping. This is a much better design than the original. Thanks for making this product available for everyone!!


serehill
Vendor
Posts: 1953
Joined: Sun Nov 20, 2011 4:00 pm
Location: Mesquite Texas

Re: Headlight adjusters.

Post by serehill » Sat Nov 02, 2013 8:58 pm

Jeff I need a set of squares. Please send me you paypal info.
1980 Honcho 258 4 speed mostly stock with 4 " lift.

WIP

You know the rude dude from IFSJA


1980 Cherokee wrangled & mangled
MSD complete system
Eddy intake
Holley 650
Comp cam 270H
4" Rusty's
Ramsey 12K winch
208
Built to drive not sit in the garage.


No longer strangled. I didn't build it for anyone else.
If you can't improve it why waste your time?

User avatar

Topic author
jaber
Vendor
Posts: 3011
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: Headlight adjusters.

Post by jaber » Thu May 28, 2015 5:25 pm

:-bd Bump to stay on front page... :-bd
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/


J10 Joel
Posts: 1
Joined: Sun Dec 13, 2015 9:50 am

Re: Headlight adjusters.

Post by J10 Joel » Sun Dec 13, 2015 10:04 am

I need a set of squares.
Are these still available?


ArchitectJS
Posts: 236
Joined: Thu Oct 15, 2015 5:01 pm

Re: Headlight adjusters.

Post by ArchitectJS » Sun Dec 13, 2015 12:58 pm

I want a set of these also- let me know we're all good and I'll paypal the funds...
1982 Cherokee, base (Bumppo)
AMC 258 / A727
AMC 20 / NP208
Holley Sniper with Hyperspark

User avatar

Topic author
jaber
Vendor
Posts: 3011
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: Headlight adjusters.

Post by jaber » Sun Dec 13, 2015 5:28 pm

My dearest apologies, but I'm currently out of square adjusters. I will do my best to get some made this week.
Thank you for your patience.
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/


MGoins
Posts: 17
Joined: Sun Jan 03, 2016 7:15 pm

Re: Headlight adjusters.

Post by MGoins » Mon Jan 11, 2016 6:55 pm

Jaber I need 2 sets of adjusters email me when you can get too them matt@serfco.com

Sent from my SM-G920V using Tapatalk


norman7302
Posts: 1
Joined: Sat Apr 02, 2016 7:53 pm

Re: Headlight adjusters.

Post by norman7302 » Sat Apr 02, 2016 8:03 pm

Hi Jaber
I would like 2 sets of the replacement adjusters my email is normanelsey@yahoo.com

User avatar

Topic author
jaber
Vendor
Posts: 3011
Joined: Sat Aug 27, 2011 5:24 pm
Location: Chino Valley, Az.

Re: Headlight adjusters.

Post by jaber » Sat Apr 02, 2016 9:20 pm

Email sent, thank you sir.
Jeff

'46 cj3a
'51 Willys p/u
'51 Willys Parkway Conversion
'74 CJ5
'75 J-20 Wrecker
'75 J-20 Cummins service truck
'77 J-10 p/u
'79 Cherokee
'88 Grand Wagoneer
http://s252.photobucket.com/albums/hh14/jeffaber/

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest