WWW.RockLaurenceVintageAutoParts.com


Topic author
rocklaurence
Vendor
Posts: 1719
Joined: Sat Mar 30, 2013 6:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by rocklaurence » Fri May 05, 2017 5:48 am

Sorry, I fixed the link above


Blutarski
Posts: 3
Joined: Mon May 22, 2017 12:50 pm

Re: WWW.RockLaurenceVintageAutoParts.com

Post by Blutarski » Wed Jun 28, 2017 8:30 am

After months of searching for a fuel tank skid plate, at a good shipped price, I was lucky enough to find Rock Laurence. Skid plate is better than described and packaging was great. All around a great experience. Thanks


Topic author
rocklaurence
Vendor
Posts: 1719
Joined: Sat Mar 30, 2013 6:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by rocklaurence » Thu Sep 28, 2017 5:38 am

I have 3 more Wagoneer hitches left. I will not be making anymore do to the cost to produce and what the market will pay for them. However, the J10 / J20 hitch will still be available.


Topic author
rocklaurence
Vendor
Posts: 1719
Joined: Sat Mar 30, 2013 6:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by rocklaurence » Thu Oct 05, 2017 5:12 am

rocklaurence wrote:I have 3 more Wagoneer hitches left. I will not be making anymore do to the cost to produce and what the market will pay for them. However, the J10 / J20 hitch will still be available.
Two left


Topic author
rocklaurence
Vendor
Posts: 1719
Joined: Sat Mar 30, 2013 6:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by rocklaurence » Fri Dec 15, 2017 12:04 pm

The Wagoneer/Cherokee tow hitch is no longer available--last one has sold


Topic author
rocklaurence
Vendor
Posts: 1719
Joined: Sat Mar 30, 2013 6:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by rocklaurence » Tue Nov 13, 2018 11:23 am

We have a new product out! It's a pair of 2" receiver mounts that you fasten under the floor to allow you to use ANY receiver / hitch step as a side step!! they are affordable, easy to install and allow you to choose any step you want to customise your FSJ. They will fit any 2 door FSJ. Check them out here: https://rocklaurencevintageautoparts.co ... tep-mounts

https://www.ebay.com/itm/FS-Jeep-J10-J2 ... :rk:1:pf:0


Topic author
rocklaurence
Vendor
Posts: 1719
Joined: Sat Mar 30, 2013 6:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by rocklaurence » Mon Dec 16, 2019 7:53 am

We have re-designed the Tow Hitch [over 100 SOLD] to a 3 piece design. This will save everyone on shipping costs. Previously, I was absorbing the extra shipping cost--some times as much as $50. View the new hitch here on YouTube The Slab64 Eps9


Topic author
rocklaurence
Vendor
Posts: 1719
Joined: Sat Mar 30, 2013 6:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by rocklaurence » Wed Feb 19, 2020 3:14 pm

I have listed a new product! It's a rear shock mount relocation bracket. Often if you rotate the rear pinion up after a Lift the shoucks bind at the axle housing. This will elliminate that and it also gives you the option to flip the brackets and drop the shock mount stud down 2". Allowing you to use the original shocks on a 2-3" lift...
https://rocklaurencevintageautoparts.co ... after-lift


Topic author
rocklaurence
Vendor
Posts: 1719
Joined: Sat Mar 30, 2013 6:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by rocklaurence » Tue Mar 03, 2020 9:29 am

The Long Spring suspension springs from Alcan are here! Ill be posting a video of the installation on YouTube. I'll run these springs for a period of time to make sure they are the Best Riding FSJ springs you can buy. Like mentioned before, these springs with the FSSR will provide 5" of lift, 12" of travel and still ride softer than any other lift spring!!! Also, adding these springs without the FSSR will provide 2.5" of lift with great performance and soft ride for the Daily Driver [note: I haven't tested it yet without the FSSR but it will work with minor changes].... :D


Topic author
rocklaurence
Vendor
Posts: 1719
Joined: Sat Mar 30, 2013 6:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by rocklaurence » Tue Mar 10, 2020 5:16 am

New Episode is up. Refurbishing a set of '70s door arm rests and door latch issues. https://www.youtube.com/watch?v=3gH4hKIq1kU


Jeepin' Pete
Posts: 81
Joined: Mon Aug 06, 2018 10:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by Jeepin' Pete » Tue Mar 17, 2020 6:48 am

Would love to see some pictures of the long spring / FSSR setup (and I'm sure I'm not alone). Post some up!
1990 Grand Wagoneer
viewtopic.php?f=12&t=16762


Topic author
rocklaurence
Vendor
Posts: 1719
Joined: Sat Mar 30, 2013 6:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by rocklaurence » Tue Mar 17, 2020 7:54 am

Im going to post a video and show the front drive shaft cross-member modification that is needed for the extra travel. I'll also show the complete setup with new shock/bump-stop mounts with rear slider box. Ill post the link soon.


Topic author
rocklaurence
Vendor
Posts: 1719
Joined: Sat Mar 30, 2013 6:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by rocklaurence » Thu Mar 26, 2020 1:19 pm

Jeepin' Pete wrote:
Tue Mar 17, 2020 6:48 am
Would love to see some pictures of the long spring / FSSR setup (and I'm sure I'm not alone). Post some up!
Look here. A video showing the Long Spring suspension and also the crossmember modification: https://www.youtube.com/watch?v=LjMELrJc-Ro


Topic author
rocklaurence
Vendor
Posts: 1719
Joined: Sat Mar 30, 2013 6:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by rocklaurence » Mon Mar 30, 2020 5:49 am

Jeepin Pete, did you get a chance to view the video?


BCRAWLER
Posts: 354
Joined: Fri Mar 29, 2013 10:11 pm
Location: Vancouver Island,BC

Re: WWW.RockLaurenceVintageAutoParts.com

Post by BCRAWLER » Mon Mar 30, 2020 3:25 pm

Glad to see the step setup you have manufactured. I did something similar on my 87 GMC only the one I made attached to the frame. The truck had a 4"lift kit with QRX16 Buckshots at 36" tall.My wife at the time was 5' nothing in height. Had to carry a plastic milk carton around so she could get in. A set of your entry handles would have helped very much. The part I liked very much was when offroading I could pull the pin and get my ground clearance back. :D
1980 Cherokee,360/727/208, propane powered,unknown lift,31' Adventuro's on Chevy rims,Warn winch
1980 J10,360/standard/208, stepside
1970 GMC 4X4 Pickup, 78 frame, 84 350, Turbo 350/205, patina galore
1986 Blazer K5, 350/205/465 trans
1990 Cherokee XJ, about to scrap for FSJ parts


Topic author
rocklaurence
Vendor
Posts: 1719
Joined: Sat Mar 30, 2013 6:53 am

Re: WWW.RockLaurenceVintageAutoParts.com

Post by rocklaurence » Mon Mar 30, 2020 4:27 pm

BCRAWLER wrote:
Mon Mar 30, 2020 3:25 pm
Glad to see the step setup you have manufactured. I did something similar on my 87 GMC only the one I made attached to the frame. The truck had a 4"lift kit with QRX16 Buckshots at 36" tall.My wife at the time was 5' nothing in height. Had to carry a plastic milk carton around so she could get in. A set of your entry handles would have helped very much. The part I liked very much was when offroading I could pull the pin and get my ground clearance back. :D
Are you referring to the "Side Step" mount under the door? What I think is [thinking outside the box] is that you can add any bumpers step you want. For example: a round tube, cast-like I have, square tube, contoured step etc.


BCRAWLER
Posts: 354
Joined: Fri Mar 29, 2013 10:11 pm
Location: Vancouver Island,BC

Re: WWW.RockLaurenceVintageAutoParts.com

Post by BCRAWLER » Mon Mar 30, 2020 4:34 pm

That is what I am refering to. On mine what I did was use a piece of square tubing that dropped down similar to a trailer hitch and installed a aluminum checker plate on the out most part as a step. The ability to remove while out in the bush is huge. No damage to step and clearance back. Most of the aftermarket steps I have seen are of a thin sheet metal that will not stand up to a rock or stump. The other thing I used to do was to move step to rear reciever to access bed of lifted truck. Could be used to reach roof on Cherokee/ Wagoneer. :fsj:
1980 Cherokee,360/727/208, propane powered,unknown lift,31' Adventuro's on Chevy rims,Warn winch
1980 J10,360/standard/208, stepside
1970 GMC 4X4 Pickup, 78 frame, 84 350, Turbo 350/205, patina galore
1986 Blazer K5, 350/205/465 trans
1990 Cherokee XJ, about to scrap for FSJ parts

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest