Looking for the wiring harness that connects at the block near the driver side wheel well, and runs back to the tail lights & reverse lights.
See pics for reference.
Sent from my Pixel 4a (5G) using Tapatalk
If you can contact me and give me some measurements, I could make one for you that is a little more updated connectors instead of the older 56 or 59 Series that are there. Whenever I am building harnesses for my vehicles or other customer's vehicles and the harness is exposed to the weather, I prefer to at a minimum use a Weather-Pack connector. That way you are not as concerned with oxidation and everything else that happens when the connector is exposed to the weather.Harry Dawg wrote: ↑Fri Dec 16, 2022 6:54 am That's what I was originally going to do, but found myself scratching my head about where some of the wires go.
For example, the reverse lights only have one wire with a bullet connector coming out of the housing.
No where to plug them into the factory wiring harness.
Is this just a ground? How would they get power?
My harness also only has 2 hot wires for the running lights / brakes, so I can't figure out where the tag lights plug into.
I have the TSM, but it's kind of lacking on detailed wiring diagrams (i,e. wire color descriptions, connector type etc.)