WTB front spring plates for 1977 Wagoneer

Place to put want ads for FSJ parts
Forum rules
Please read the sales area rules before posting here. Thanks!
Post Reply

Topic author
Carl72J2000
Posts: 20
Joined: Sun Aug 26, 2012 10:55 pm
Location: OKLAHOMA

WTB front spring plates for 1977 Wagoneer

Post by Carl72J2000 » Fri Jul 22, 2022 10:26 pm

Looking for the front spring plates for a 77 Wagoneer.
1972 J2000


“You have enemies? Good. That means you've stood up for something, sometime in your life.”
-Winston Churchill

"Just because I don't care doesn't mean I don't understand."
-Homer Simpson


will e
Posts: 4820
Joined: Sat Aug 18, 2012 8:21 am

Re: WTB front spring plates for 1977 Wagoneer

Post by will e » Wed Jul 27, 2022 7:39 pm

Have you had any luck finding these?
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge

User avatar

Tad
Vendor
Posts: 2260
Joined: Fri May 13, 2011 4:08 am
Location: Southern AZ
Contact:

Re: WTB front spring plates for 1977 Wagoneer

Post by Tad » Sun Jul 31, 2022 3:06 pm

I’ll look in the shop in the morning, I’m sure I have some.
A collection of 1966 to 1986 parts.
Self Inflicted Flesh Wound
Caddy425/TH400/Atlas 4spd/14B/D60/37" Trxus MT's
(Join date = Friday the 13th)

My Stuff:
http://www.ttsfabworks.com/
Tech Stuff:
IFSJA WMS Project


Topic author
Carl72J2000
Posts: 20
Joined: Sun Aug 26, 2012 10:55 pm
Location: OKLAHOMA

Re: WTB front spring plates for 1977 Wagoneer

Post by Carl72J2000 » Sun Jul 31, 2022 8:22 pm

will e wrote:
Wed Jul 27, 2022 7:39 pm
Have you had any luck finding these?
Not yet, I modified a set I bought from Ruff Stuff to get my Jeep back off of the jack stands.
1972 J2000


“You have enemies? Good. That means you've stood up for something, sometime in your life.”
-Winston Churchill

"Just because I don't care doesn't mean I don't understand."
-Homer Simpson


Topic author
Carl72J2000
Posts: 20
Joined: Sun Aug 26, 2012 10:55 pm
Location: OKLAHOMA

Re: WTB front spring plates for 1977 Wagoneer

Post by Carl72J2000 » Sun Jul 31, 2022 8:23 pm

Tad wrote:
Sun Jul 31, 2022 3:06 pm
I’ll look in the shop in the morning, I’m sure I have some.
Thanks
1972 J2000


“You have enemies? Good. That means you've stood up for something, sometime in your life.”
-Winston Churchill

"Just because I don't care doesn't mean I don't understand."
-Homer Simpson


will e
Posts: 4820
Joined: Sat Aug 18, 2012 8:21 am

Re: WTB front spring plates for 1977 Wagoneer

Post by will e » Mon Aug 01, 2022 6:14 am

I think I have some. I will take a picture and post it to make sure it is what you are looking for.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge


Topic author
Carl72J2000
Posts: 20
Joined: Sun Aug 26, 2012 10:55 pm
Location: OKLAHOMA

Re: WTB front spring plates for 1977 Wagoneer

Post by Carl72J2000 » Mon Aug 01, 2022 5:16 pm

will e wrote:I think I have some. I will take a picture and post it to make sure it is what you are looking for.
Thanks.

Sent from my SM-F711U using Tapatalk

1972 J2000


“You have enemies? Good. That means you've stood up for something, sometime in your life.”
-Winston Churchill

"Just because I don't care doesn't mean I don't understand."
-Homer Simpson


will e
Posts: 4820
Joined: Sat Aug 18, 2012 8:21 am

Re: WTB front spring plates for 1977 Wagoneer

Post by will e » Thu Aug 04, 2022 5:50 pm

Carl72J2000 wrote:
Mon Aug 01, 2022 5:16 pm
will e wrote:I think I have some. I will take a picture and post it to make sure it is what you are looking for.
Thanks.

Sent from my SM-F711U using Tapatalk
Sorry, got side tracked. Here is a picture of what I have. I bought these off of Flint years ago, they came off of a 'passenger side drop' rig with a dana 44. I ended up not using them when I tossed a different axle in the front.

Image
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge


Topic author
Carl72J2000
Posts: 20
Joined: Sun Aug 26, 2012 10:55 pm
Location: OKLAHOMA

Re: WTB front spring plates for 1977 Wagoneer

Post by Carl72J2000 » Fri Aug 05, 2022 8:02 pm

will e wrote:
Thu Aug 04, 2022 5:50 pm
Carl72J2000 wrote:
Mon Aug 01, 2022 5:16 pm
will e wrote:I think I have some. I will take a picture and post it to make sure it is what you are looking for.
Thanks.

Sent from my SM-F711U using Tapatalk
Sorry, got side tracked. Here is a picture of what I have. I bought these off of Flint years ago, they came off of a 'passenger side drop' rig with a dana 44. I ended up not using them when I tossed a different axle in the front.

Image
Thanks for the pic. I haven’t seen a set in over a decade, what’s the post on it for, sway bar? My axle has factory shock mounts on it. How much do yo want for them?
1972 J2000


“You have enemies? Good. That means you've stood up for something, sometime in your life.”
-Winston Churchill

"Just because I don't care doesn't mean I don't understand."
-Homer Simpson


will e
Posts: 4820
Joined: Sat Aug 18, 2012 8:21 am

Re: WTB front spring plates for 1977 Wagoneer

Post by will e » Sat Aug 06, 2022 11:13 am

UPDATE: It looks like you are doing a SOA/SF (I saw your post in 'what have you done to your jeep'.)

If that's the case I think you actually need spring plates from a drivers drop rig, not a passenger drop rig. When you do the SOA the plates go on 'upside down' but still have to be on the right/left side. This puts the sway bar connection in the wrong place. It's why I bought these, I had a driver drop and did a SOA and the sway bar connections were in the wrong place. You might post up in the regular board and verify this.





Yeah, looking at this video:
https://www.bing.com/videos/search?q=wa ... &FORM=VIRE

They are for the sway bar.

I am not using them so how about $10 for the trouble plus the cost of the ride? I can probably get them into either a small or medium flat rate box, so figure $10 or $16 for the ride. $20 or $26 total.

If that works, send me a PM. I don't do paypal or whatever so you can send me a check (or money order or whatever) once you receive the parts.
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge


Topic author
Carl72J2000
Posts: 20
Joined: Sun Aug 26, 2012 10:55 pm
Location: OKLAHOMA

Re: WTB front spring plates for 1977 Wagoneer

Post by Carl72J2000 » Sun Aug 07, 2022 7:00 pm

will e wrote:UPDATE: It looks like you are doing a SOA/SF (I saw your post in 'what have you done to your jeep'.)

If that's the case I think you actually need spring plates from a drivers drop rig, not a passenger drop rig. When you do the SOA the plates go on 'upside down' but still have to be on the right/left side. This puts the sway bar connection in the wrong place. It's why I bought these, I had a driver drop and did a SOA and the sway bar connections were in the wrong place. You might post up in the regular board and verify this.





Yeah, looking at this video:
https://www.bing.com/videos/search?q=wa ... &FORM=VIRE

They are for the sway bar.

I am not using them so how about $10 for the trouble plus the cost of the ride? I can probably get them into either a small or medium flat rate box, so figure $10 or $16 for the ride. $20 or $26 total.

If that works, send me a PM. I don't do paypal or whatever so you can send me a check (or money order or whatever) once you receive the parts.
PM sent.

Sent from my SM-F711U using Tapatalk

1972 J2000


“You have enemies? Good. That means you've stood up for something, sometime in your life.”
-Winston Churchill

"Just because I don't care doesn't mean I don't understand."
-Homer Simpson

User avatar

Stuka
Site Admin
Posts: 11113
Joined: Thu May 12, 2011 5:53 pm
Location: CA
Contact:

Re: WTB front spring plates for 1977 Wagoneer

Post by Stuka » Mon Aug 08, 2022 6:44 am

will e wrote:
Sat Aug 06, 2022 11:13 am
UPDATE: It looks like you are doing a SOA/SF (I saw your post in 'what have you done to your jeep'.)

If that's the case I think you actually need spring plates from a drivers drop rig, not a passenger drop rig. When you do the SOA the plates go on 'upside down' but still have to be on the right/left side. This puts the sway bar connection in the wrong place. It's why I bought these, I had a driver drop and did a SOA and the sway bar connections were in the wrong place. You might post up in the regular board and verify this.





Yeah, looking at this video:
https://www.bing.com/videos/search?q=wa ... &FORM=VIRE

They are for the sway bar.

I am not using them so how about $10 for the trouble plus the cost of the ride? I can probably get them into either a small or medium flat rate box, so figure $10 or $16 for the ride. $20 or $26 total.

If that works, send me a PM. I don't do paypal or whatever so you can send me a check (or money order or whatever) once you receive the parts.
74-79 spring plates and 80+ springs plates are not cross compatible as the u-bolt dimensions changed. The sway bar plate can be modified, but the plate itself has to be retained.
2017 JKU Rubicon Lifted and stuff
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest