Atlas Suspension

Area for Offroad Modification Tech
Post Reply

Topic author
Mreuther12
Posts: 24
Joined: Fri Oct 04, 2019 10:45 am
Location: San Diego, CA

Atlas Suspension

Post by Mreuther12 » Mon Dec 02, 2019 3:36 pm

Anyone running these springs? They had a post on IG for 30% all orders from now until Dec 7th thought they would be worth taking a look into. Would be interesting to know if they make springs/lifts for the earlier rigs. Site doesn't have too much information.

Image
1970 Wagoneer
- 350 Buick Dauntless V8
- D27 Front/D44 Rear

User avatar

Stuka
Site Admin
Posts: 9259
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: Atlas Suspension

Post by Stuka » Mon Dec 02, 2019 4:09 pm

Never heard of them. But being that they have their years entirely wrong, not sure I would choose them over a more experienced company.
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Lifted and stuff
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ


Topic author
Mreuther12
Posts: 24
Joined: Fri Oct 04, 2019 10:45 am
Location: San Diego, CA

Re: Atlas Suspension

Post by Mreuther12 » Mon Dec 02, 2019 4:32 pm

Stuka wrote:
Mon Dec 02, 2019 4:09 pm
Never heard of them. But being that they have their years entirely wrong, not sure I would choose them over a more experienced company.
I was checking out their instagram and they did the springs on the KC Waggy at SEMA this year. That is what raised the question.

https://www.instagram.com/p/BzHhhhyp-x2 ... _copy_link
1970 Wagoneer
- 350 Buick Dauntless V8
- D27 Front/D44 Rear

User avatar

Stuka
Site Admin
Posts: 9259
Joined: Thu May 12, 2011 5:53 pm
Location: Sonora, CA
Contact:

Re: Atlas Suspension

Post by Stuka » Mon Dec 02, 2019 4:54 pm

Mreuther12 wrote:
Mon Dec 02, 2019 4:32 pm
Stuka wrote:
Mon Dec 02, 2019 4:09 pm
Never heard of them. But being that they have their years entirely wrong, not sure I would choose them over a more experienced company.
I was checking out their instagram and they did the springs on the KC Waggy at SEMA this year. That is what raised the question.

https://www.instagram.com/p/BzHhhhyp-x2 ... _copy_link
I have no doubt they can build springs. But the springs on our vehicles changed multiple times, and were different between various models in the same years at some points. If you look at Hell Creeks ordering page, they ask year, model, bushing sizes, etc.

The Atlas springs most likely only fit 76-91 and not 63-75.
1981 J10 AMC 258 with HEI and Weber 32/36 DGEV Carb, T176, NP208, D44/M23 with 4.56 gears and Detroit Locker, 6" lift, 33x12.50 Cooper STT's, BJ's Offroad Rear Dozer Bumper.
2017 JKU Rubicon Lifted and stuff
Pevious Jeeps: 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ


Topic author
Mreuther12
Posts: 24
Joined: Fri Oct 04, 2019 10:45 am
Location: San Diego, CA

Re: Atlas Suspension

Post by Mreuther12 » Mon Dec 02, 2019 8:04 pm

Stuka wrote: I have no doubt they can build springs. But the springs on our vehicles changed multiple times, and were different between various models in the same years at some points. If you look at Hell Creeks ordering page, they ask year, model, bushing sizes, etc.

The Atlas springs most likely only fit 76-91 and not 63-75.
I gave them a call. They would need the spring to match and re-engineer it. So yes they can do it, but it would be custom.



Sent from my iPhone using Tapatalk
1970 Wagoneer
- 350 Buick Dauntless V8
- D27 Front/D44 Rear

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest