Mreuther12 wrote: ↑Sun Dec 19, 2021 9:40 pm
I’m running Raceline Boost 17x9 -12 offset. I believe that stock backspacing is around 3.75” but you are going to have a tough time finding a modern wheel with that backspace
Sent from my iPhone using Tapatalk
I was looking at the Boost originally but leaning toward the Krank.
The 17x9 Krank has a 4.52" backspacing with a -12 offset, basically the same as your wheel.
My current wheels, best as I can tell, has 4.125" back spacing and -12 offset.
If I'm figuring correctly, that would cause the Krank or Boost to sit deeper inside the wheel well about 1/2" more than my current wheel. Look wise I think it would be fine but I'm concerned about brake component clearance. I have direct fit replacement discs and calipers so don't know if that's a concern.
Do you have a picture of your rig with the wheels you'd d mind sharing? Do you have factory discs with up front and is there any issue?
Also, I measured the bore on my current wheels and it is 3.5" or ~89mm. The Krank is 106mm and Boost is nearly 109mm. I thought the wheels required a larger bore to clear the hubs but that seems much larger than needed?
TIA