Hey all,
New guy here. I just picked up a ‘64 J200. I plan to do engine/tranny/axle/suspension/etc swap. The bed is in rough shape and probably needs to be replaced. I’m still learning but haven’t yet found what J truck body parts are compatible. Will a J10 bed fit on j200? Any help is much appreciated. Is there a resource (document or article) that may explain?
J200 body
-
will e
- Posts: 5103
- Joined: Sat Aug 18, 2012 8:21 am
Re: J200 body
Hi! I can't answer your question but someone will pipe in soon. Just wanted to say Welcome! and WOW a 64 J200!
81 Waggy 'WILL E' Retired
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
82 Cherokee WT - SOA/SF/high steer/Alcan springs/agr box/Borgeson steering shaft/AMC 401/performer/holley TA/HEI/BeCool/727/ALTAS (2.0/2.72/5.44)/D60 Snofighter(Yukon Zip,hubs,stubs,4.56)/14 Bolt (FF,BF shave, Discs, ARB,Artec Truss)/MTR 37X12.5/Corbeau XRS Baja & 5 point retractable harness/Hella Aux lights/tuffy console/killer32 sliders/Evil Twin bumpers, rack and roll cage/WARN 8000/TT Fabworks steering brace/dual batts/custom TC skid plate/ARB fridge
-
Stuka
- Site Admin
- Posts: 11812
- Joined: Thu May 12, 2011 5:53 pm
- Location: CA
- Contact:
Re: J200 body
Welcome to the forum!
Sadly, the early J-Trucks have a different wheelbase than later J-Trucks. Which certainly limits your bed options.
The cabs are all kind of similar. But body mounts did change positions, and the floor changed a bit as different drive trains were used.
The front sheet metal will swap between all years. But there are differences. The hood for rhino grill equipped jeeps was different later hoods, though they do swap between each other. You just end up with a gab around the grill. The front valance changed for various grill and headlight configurations. But they will swap between each other as the frame side mounts stayed the same as I recall.
Sadly, the early J-Trucks have a different wheelbase than later J-Trucks. Which certainly limits your bed options.
The cabs are all kind of similar. But body mounts did change positions, and the floor changed a bit as different drive trains were used.
The front sheet metal will swap between all years. But there are differences. The hood for rhino grill equipped jeeps was different later hoods, though they do swap between each other. You just end up with a gab around the grill. The front valance changed for various grill and headlight configurations. But they will swap between each other as the frame side mounts stayed the same as I recall.
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
-
Txflyer16
Topic author - Posts: 26
- Joined: Thu Sep 02, 2021 9:44 am
Re: J200 body
What windshields are compatible with a '64 J200?
'81 CJ-5
'93 XJ
New project '79 J-10
Looking for a Waggy
'93 XJ
New project '79 J-10
Looking for a Waggy