edelbrock intake 3731 and Holley TA

[Saul32]

Anyone running an Edelebrock 3731 with Holley Truck Avenger? Would you care to share pics of as much as you can? Text if possible 773 757 7413
Thanks gents

[Saul32]

All lines are connected. Just need to order the trans kick down adapter and carb linkage adapter anyone know what part numbers I need?

[fulsizjeep]

moved to Modified FSJ Tech

I have not had to buy any additional linkage parts to hook up a Holley TA.

[Saul32]

What did you do to connect the throttle cable?

[fulsizjeep]

There is a ball stud on the outer linkage that the cable snaps on. Seems I installed a bolt on the throttle for the tranny kick down for the one with a 727.

a T400 setup


the other T400 setup we have


closer look at another Holley before I put the TA on my 88 with 727

[Ristow]

ugh. headers? really flint? dislike torque or sumthin'?


if you have the 4 barrel throttle cable bracket-2 sets of mounting holes-you don't need a bracker on the carburetor throttle arm. the 2 barrel bracket sits further back,and the gas pedal will be too high without the adapter.

the TV rod just uses a 1/4" bolt through the throttle arm. it is adjustable.

[fulsizjeep]

headers = yes!