Will J10 move at all with missing chain in QuadraTrac?
-
SRT6
Topic author - Posts: 36
- Joined: Mon Jan 21, 2019 9:46 am
- Location: Hilton Head, SC
Will J10 move at all with missing chain in QuadraTrac?
Hi guys. Longshot here. Is a J10 driveable in any way with the QuadraTrac chain removed?
-
fulsizjeep
- Moderator
- Posts: 5012
- Joined: Sun Nov 06, 2011 7:21 am
- Location: Fruitville, FL
- Contact:
Re: Will J10 move at all with missing chain in QuadraTrac?
NO
Flint Boardman
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac
88 GW, 401/727/208, 5" lift, D44s/4.10s/locked up, 35s
https://jubileejeeps.org/quadratrac
-
Stuka
- Site Admin
- Posts: 11804
- Joined: Thu May 12, 2011 5:53 pm
- Location: CA
- Contact:
Re: Will J10 move at all with missing chain in QuadraTrac?
Since both front and rear outputs run off the chain, it will not as Flint states above.
If it was say, an NP208 or NP229, then it could be in rear drive only and still move with the chain missing.
If it was say, an NP208 or NP229, then it could be in rear drive only and still move with the chain missing.
2017 JKU Rubicon
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
Pevious Jeeps: 1981 J10, 1975 Cherokee, 2008 JK, 2005 KJ, 1989 XJ
-
SRT6
Topic author - Posts: 36
- Joined: Mon Jan 21, 2019 9:46 am
- Location: Hilton Head, SC
-
SRT6
Topic author - Posts: 36
- Joined: Mon Jan 21, 2019 9:46 am
- Location: Hilton Head, SC
-
1978J10REDWHITE
- Posts: 263
- Joined: Fri Nov 20, 2020 7:25 pm
Re: Will J10 move at all with missing chain in QuadraTrac?
BJ’s has the USA Made chains in stock now as i JUST got a kit and they claimed to have more available now.
Do NOT get “crown” chinna made chains, repeat, DO NOT!
Do NOT get “crown” chinna made chains, repeat, DO NOT!