Page 1 of 1

What am I missing

Posted: Sun Sep 20, 2020 5:30 pm
by RustyDusty
I think that this is the inspection cover, but cannot find an AMC diagram of the 727, and wanted to confirm. 727-1 is a poor photo of my exposed flywheel. The other is available on fleabay. If it is the correct part, can it be replaced from underneath without too much difficulty?

Thanks for the help,
727-1.jpg
727InspectionCover.jpg

Re: What am I missing

Posted: Sun Sep 20, 2020 5:57 pm
by selkplitt
It looks right but it has been a while since I looked at one. But putting it on underneath is easy couple of bolts and it’s in.

Re: What am I missing

Posted: Sun Sep 20, 2020 6:16 pm
by GrandW
Yes, there's a plate that goes across that, which is what you have shown. 4 bolts. 2 on the bottom. 2 on the top, driver side that also hold in a plate for the 4x4 / hi low (cant remember the exact). Fairly easy to remove or install.Image

Sent from my SM-G960U1 using Tapatalk



Re: What am I missing

Posted: Sun Sep 20, 2020 8:24 pm
by RustyDusty
That is a perfect picture. Thanks for the info.

Re: What am I missing

Posted: Mon Sep 21, 2020 6:34 am
by tgreese
Jeep PN 3213744. Widely available new aftermarket. Should be listed in the parts books at www.oljeep.com

Re: What am I missing

Posted: Tue Sep 22, 2020 3:11 pm
by babywag
I probably have several send me a message if ya want.