Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
I have a half dozen power window motors that are good, but need cleaning, paint, etc. do doing that now as make ready for upcoming projects. I know the recommendation to lube the flex track is Sil-Glyde, but what lube is recommended for the motor's metal worm gear / round plastic gear? Standard lithium grease or other? Could not find anything in the TSM ... Thanks
1983 CJ7 Renegade "Stella"
1977 Cherokee Chief WT "Moytoy" (current project: engine start next step)
1967 Super Wag (next up)
1969 J3600 "El Presidente"
1983 Wagoneer "Hulu"
1979 and 1980 Wags ... for parts
2014 JKUR "Ruby"
Supposedly the EP additives added to greases and oils designed for metal-to-metal contact (gear oils and chassis grease) are not good for plastics. A synthetic grease is recommended ... what's wrong with SylGlide?
White lithium grease in the spray can is meant for general purpose use. Comes in a tube too. Should be ok. I'd not use the wheel bearing grease.
Tim Reese
Maine beekeeper's truck: '77 J10 LWB, 258/T15/D20/3.54 bone stock, low options (delete radio), PS/PDB, hubcaps.
Browless and proud: '82 J20 360/T18/NP208/3.73, Destination A/Ts, 7600 GVWR
Copper Polly: '75 CJ-6, 304/T15, PS, BFG KM2s, soft top
GTI without the badges: '95 VW Golf Sport 2000cc 2D
Dual Everything: '15 Chryco Jeep Cherokee KL Trailhawk, ECO Green
Blockchain the vote.