Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Today I was at the Home Depot and figured I'd grab a few big jugs of oil to change the Gladiator and the XJ (both with a 4.0). Normally I use Mobil...
Last post
Yeah I gave up on the synthetic pretty quickly. Now I'm running the Motorcraft diesel 10W-30 because it's super high zinc w/o being so thick it bogs...
When we were looking to get the ZJ put back together last year, as it had some rust issues (300k miles in the salty midwest as the daily driver will...
Last post
What, you're convinced that anything I say is inherently wrong now, so you're going around to say that I'm wrong about everything? Because I'm young...
Got to get out and do some wheeling this weekend and meet up with some good friends.
We all get together at Windrock and campout once a year, so...
Last post
Rattle Rock and school bus are my favorite technical trails, other than that I just love wondering around there. If you haven’t done so need to go up...
Went to Sheriff's JeepFest this weekend.
Took the Blue Jeep out and did a little four wheeling. This was the hardest I had tested it, and even got it...
Last post
Very exceptional looking CJ. The ones that get passed down and kept true to the desires of the original matriarch, it makes each and every drive...
I’m looking at a 96 Cherokee with the 318 (5.2L) engine. When this Jeep is put under load e.g going up a grade, it will act like it’s vapor locking....
Last post
I’m looking at a 96 Cherokee with the 318 (5.2L) engine. When this Jeep is put under load e.g going up a grade, it will act like it’s vapor locking....
Some photos of my favorite/ most unique rigs from Jeep Beach and Florida Jeep Jam.
Sent from my Pixel 4a (5G) using Tapatalk
Last post
Yeah, obviously I referencing the M38A1 (CJ5) next to the two flat fenders. CJ5's are by no means big, but the much wider windshield makes them look...
Put in new engine. Same old starter and flexplate were fine so I reused them.
It starts after a bad grind. Drove it to a shop to fix that cause I got...
Last post
If you ever get a chance to pull the starter, check the orientation of the flex plate. That mid plate should not need to be trimmed.
Howdy FSJers!
I need some help from the experts on narrowing down the vehicle that my drivetrain swap came from. The PO performed the swap forever...
Last post
This is clearly Buick 350 V8 J-series. It does not matter whether it's from a Wagoneer or a J-truck. In this context, these parts are the same across...
Am not a professional editor but working as a team member for a school. My job responsibility is to gather healthcare, body, skin, hair and diseases...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
