Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Looking for a new stereo head unit that fits into old radio spot. Nothing to fancy, just something with bluetooth, usb radio.
Any ideas where to find...
Last post
I did the same with shatter proof poly carbonate that I had from another project except I recovered with new vinyl that matched my seats.
Hi all,
Just picked up a 1984 Grand Wagoneer. I’m working trough the bugs and everything is waking up from its long sleep since 2019 / 2015 when the...
Last post
Looks like all the lifters are pumping, but might have a weak one. Engine probably run another 40 years like it is, but for smoothing it out, good...
So i bougjt this factory J10/20 bumper from a guy in md for $50. Great price. Only had pitting inside of it but not terrible..few bottom lips had to...
Last post
I actually have not seen one that is bent like that. The factory bumper on my J10 was straight as could be. Though it was a slightly different design...
Can anyone show me how you install a mechanical oil pressure gauge on an amc 360? Where do you put the pressure line? My stock gauge is not working,...
Last post
Have you tried to diagnose why yours went bad to begin with ?
Tgrease which gauge we talking about here thats slow ? The one on my grand wagoneer.....
My son has a 60's era J Truck bed. He wants to use the factory filler neck but is struggling to find a fuel cap. Its a larger opening than most caps...
Last post
The tabs measure 1.776 inches. Let me know if you need any other measurements.
My 71 has had constant issues with taillights but now it's reaching critical annoyance.
-Brake lights don't work whatsoever.
-Both turn...
Last post
Regarding comment above, Jeepsterman sells a kit to convert to a mechanical switch (the GM-style switch). Was curious about that so I looked online -...
Over the past 2 years or so, I've been having lots of issues with my wiper motor giving out. I have checked and lubed all the bushings, and moved it...
Last post
Awesome! Will probably be going that route, time to start gathering up some parts and making plans...
90A42F60-796B-47E1-B9CA-19D8D79A159A.jpeg I recently bought this pretty clean Rhino Grill and the rest of it for my Wagon. The grill itself has a few...
Last post
What to understand and remember while doing any such repair is the concept of stretch. The damaged spokes are no longer taking the shortest route to...
Hi guys, putting new springs on after a couple years of jack stand living and can’t confirm the size of the stock u-bolts - can someone please...
Last post
I believe the front u-bolt set that BJ's Offroad sells has the u-bolts for all 74+ FSJs. Which means it has two of the larger u-bolts, as some years...
When I got my truck, the front leafs were flattened due to a huge homemade bumper on the front. I replaced the bumper with a correct one and bought a...
Last post
Saggy leaf springs are a common complaint for Jeeps. If you want to look at old threads, there are plenty about replacing springs.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
